Avenview SPLIT-HDSDI-4-RS Before Installation, Panel Description, Front Panel, Rear Panel

Page 5
1.7Before Installation

1.7Before Installation

∙Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.

∙Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.

∙Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.

∙Do not twist or pull by force ends of the optical cable. It can cause malfunction.

1.8Panel Description

FRONT PANEL

1.

HD/SD-SDI Input

2.

LED – Reserved

 

 

 

 

3.

LED – Power Indicator

4.

5V DC Power Jack

 

 

 

 

REAR PANEL

5.

HD/SD-SDI Output 1

6.

HD/SD-SDI Output 2

 

 

 

 

7.

HD/SD-SDI Output 3

8.

HD/SD-SDI Output 4

 

 

 

 

www.avenview.com

5

 

 

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Models SPLIT-HDSDI-4-RS 4 Port HD/SD-SDI Splitter with ReclockingUser’s Guide Regulatory Notices Federal Communications Commission FCC Table of Contents1.2 Safety Instructions 1.1 Important Safeguardsreference What the warranty does not cover Section 1 Getting Started1.6 Package Contents 1.5 Features1.3 Regulatory Notices Federal Communications Commission FCC 1.4 Introduction1.8 Panel Description 1.7 Before InstallationFRONT PANEL REAR PANELAutomatically reclocks bypassed SDI signals Section 2 InstallationFor to bypass SDI signal Default Operation modeDescription Section 3 SpecificationsDisclaimer
Top Page Image Contents