Avenview SPLIT-HDSDI-4-RS specifications Installation, Bottom Panel, 1483 / 1485 Mbps

Bottom Panel

PIN 1	- OFF	PIN 2 – OFF	Auto rate detect (143 Mbps rate operation supported only in ARD mode)
PIN 1	- OFF	PIN 2 – ON	270 Mbps
PIN 1	– ON	PIN 2 – OFF	1483 / 1485 Mbps
	PIN 3 - OFF		Automatically reclocks bypassed SDI signals
	PIN 3 - ON		For to bypass SDI signal
	PIN 4 - OFF		Default Operation mode

Section 2: Installation

Follow these instructions for installation of SPLIT-HDSDI-4-RS:

1.Ensure SPLIT-HDSDI-4-RS and all other source devices are turned off

2.Connect a camera or other HD/SD-SDI device to Input of SPLIT-HDSDI-4-RS

3.Connect devices equipped with HD/SD-SDI inputs (e.g. monitors or video processors) to SPLIT-HDSDI-4-RS outputs

4.Turn ON all devices connected to output of SPLIT-HDSDI-4-RS

5.Plug power adapter to 5V DC power jack of SPLIT-HDSDI-4-RS

HD/SD-SDI Camera

SPLIT-HDSDI-4-RS

4 HD/SD-SDI Displays

www.avenview.com6