Layout | The preset layout for main & sub channels |
Horizontally flip the output video | |
Vertically flip the output video | |
SWAP | Swap the main the sub channel |
Color | The background color selection |
Main |
|
Input Source | Select a video/graphic input of the main channel |
Visible | Display the main channel or not |
Border | Display the main channel’s border |
Label | Display the main channel’s label. Users can define the content of the label |
Layer | This will make the main channel overlays the sub channel |
Pause | Freeze the display of the main channel |
Full Screen | Display the main channel full screen |
Color Balance | Automatically do the color balance while the main channel’s input is from VGA/Component |
Auto Config | Automatically do the auto adjustment while the main channel’s input is from |
| VGA/Component |
Sub |
|
Input Source | Select a video/graphic input of the |
Visible | Display the |
Border | Display the |
Label | Display the |
Layer | This will make the |
Pause | Freeze the display of the |
2.5.1Control-Setting Dialog
Border: Select main or sub channel for further setting
Clear All | Clear all OSD items |
Apply | Apply the settings |
Border Color | Setup border’s color by clicking on “Color Settings” |
Border Width | Input border’s width |
Border Type | The placemat of border has three types: |
| Inside means the added border is fully inside the video. |
| Outside means the added border is completely outside the video and this added border can overlay |
| the other video input. |
| Middle means the border half inside the video and half outside the video |
Text Color | Select the color of the label by clicking on “Color Settings” |
Text Auto | When selected the label on the screen for each channel will display its corresponding input channel |
| type. |
| When not selected the user can input the desired string to be displayed |
Duty Cycle | Enables blinking of OSD borders and labels |
Frequency | Select how fast OSD border and labels blink |
www.avenview.com | 15 |
|
|