1.6Before Installation
∙Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.
∙Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.
∙Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.
∙Do not twist or pull by force ends of the optical cable. It can cause malfunction.
1.7Panel Description
FRONT PANEL
1. | 2. | HD/SD | |
| (Green = HD, Orange = SD) | ||
|
|
| |
3. | 4. | Power indicator | |
|
|
|
|
5. | 6. | IR Receiver (reserved) | |
|
|
|
|
7. | Power Connector |
|
|
|
|
|
|
REAR PANEL
1.HDMI Output
2.Component / RGB Output
www.avenview.com | 5 |
|
|