Extron electronic RGB 158XI, RGB 138XI user manual Wiring captive screw connectors for audio output

Page 15

Installation and Operation, cont’d

step 1 to connect the computer to the interface. Set the front panel monitor ID bit DIP switches to On if no local monitor will be used.

5.Connect powered speakers or another audio device to the rear panel captive screw connector. Follow the wiring guide shown below. Insert the wires into the appropriate openings. Tighten the screws on top to fasten the wires, then insert the wired audio connector into the audio output connector on the interface rear panel.

Connect the sleeve to ground (GND). Connecting the sleeve to a negative (-) terminal will damage the audio output circuits.

Mounted under

aDesk

Front

Rear

RGB 138xi

Through-desk or Rack Mounted

LBC w/ Audio

Cable

AC Power

Network

Connection

Audio

or

Sample Modular Connector Plates

Unbalanced Output

Tip

See Warning

Sleeve (s)

Tip

See Warning

Balanced Output

Tip

Ring

Sleeve (s)

Tip

Ring

Wiring captive screw connectors for audio output

6.Set the DIP and toggle switches. Use the “Front Panel” and “Rear Panel” sections of this chapter as a guide.

7.Connect power cords and turn on the devices in the following order: display and audio output devices (projectors, monitors, speakers), interface, and input device (computer).

Power

2 - BNC

2 - RCA

2 - S-Video

2 - F Connectors

Front

Rear

RGB 158xi

MonitorProjector

2 - 3.5mm Stereo mini

DB9

HD15

1 - S-Video / 2 - RCA

Through-desk or

Rack Mounted

or

Mounted under

a Desk

AC Power

Network

Connection

Audio

Monitor

or

The system is now ready for operation.

The illustration on the facing page shows typical system installation and cable connections for both models.

Power

PC Computer

Projector

 

Typical RGB 138xiand RGB 158xiinstallation and cable setups

2-18 RGB 138xi, RGB 158xi Installation and Operation

RGB 138xi, RGB 158xi Installation and Operation 2-19

Page 14 Page 16
Image 15
Page 14 Page 16
Contents VGA Interfaces with Stereo Audio and Adsp User’s ManualPrecautions Extron’s WarrantyFCC Class a Notice Table of Contents Table of Contents, cont’d IntroductionRGB 138xi, RGB About the RGB 138xi and RGB FeaturesIntroduction About This ManualIntroduction, cont’d Installation and OperationFront Panels Installation and OperationInstallation Overview Pin D male analog video input connectorInstallation and Operation, cont’d RGB 158xi front panelLocal monitor is not connected to Installation and Operation, cont’d Rear Panels RGB 138xi and RGB 158xi rear panelsSOG sync on green Setting Internal Jumpers Stereo audio output connector This 3.5 mmSpare RGB 158xi only Sync polarity jumper This jumper adjusts Installing Adapter PlatesPins 1 and 2 connected, Pins 2 and 3 connectedRGB 138 Through-desk mounting Installation and Operation, cont’d Mounting the InterfacesTabletop/desktop placement Under-desk mountingRack mounting CablingWiring captive screw connectors for audio output Installation and Operation, cont’d Troubleshooting SpecificationsSpecifications Accessories and Part Numbers Specifications, cont’dGeneral Cables Accessories and Part NumbersAccessories Included PartsAdapter Plates Accessories and Part Numbers, cont’dSingle Type Connector Architectural Adapter Plates RGB 138xi, RGB 158xi Accessories and Part Numbers
Related manuals
Manual 2 pages 26.41 Kb
Top Page Image Contents