Extron electronic MTP Series setup guide Power connection all models

Installation, cont’d

Power connection (all models)

See Figure 1-6 to identify the power connections and indicators.

MTP Transmitters

INPUT

MTP Receivers

OUTPUT

L	R		L		R
G		G
12V	S-VIDEO OUTPUT	12V		INPUT	S-VIDEO
0.5a MAX	MTP T SV A RCA	0.5a	MAX	MTP R SV A RCA
F	MTP AAP Transmitters	F G

+ − OUTPUT POWER 12V 0.5A MAX

F

VIDEO	RAUDIO INL
IN

MTP T AV

Figure 1-6 — Power connections and indicators

F	Power connector — Plug the external 12 VDC power supply
	into this 2-pole captive screw connector on both the transmitter
	and the receiver. Figure 1-7 shows how to wire the connectors.

Smooth Ridges + _

A A

SECTION A–A

Power Supply	Tie Wrap
Output Cord

3 5

Captive Screw Connector

Figure 1-7 — Power connector wiring

CPower supply voltage polarity is critical. Incorrect voltage polarity can damage the power supply or MTP. Identify the power cord negative lead by the ridges on the side of the cord (Figure 1-7).

1-8 VersaTools ® MTP Series • Installation

Refer also to the VersaTools ® MTP Series User’s Manual at www.extron.com.