Extron electronic MLC 104 Plus Series setup guide About this Manual, Differences between models

Page 8

Introduction

About this Manual

This setup guide describes the

•MLC 104 Plus Series MediaLink® Controllers

•Global Configurator application

•MLC 104 Plus Series hardware installation

•MLC 104 Plus Series device connections

•MLC 104 Plus Series software configuration

The MLC 104 Plus Series MediaLink Controllers

The Extron MLC 104 Plus Series MediaLink Controller is an easy-to-use control panel for any small classroom or meeting room. It is designed to control a wide range of smaller A/V systems. The MLC 104 Plus Series controllers standardize the control interface for all systems, making display systems simple to use. Standardization also makes setup and maintenance easier to support.

A MLC 104 Plus Series Controller acts as an extended remote control panel. It is not a switcher; instead, as a controller,

it tells the display when to switch between its various inputs. Presenters with little or no training can walk into any multimedia classroom equipped with an MLC 104 IP Plus or MLC 104 Plus and operate the A/V system.

The MLC includes universal display control for a display’s power, input switching, and volume control. For one-button functionality, the MLC features backlit buttons that can be custom-labeled for easy identification. Because the buttons are illuminated, they are helpful for presenters in low-light environments.

The MLC can also "learn" IR commands for centralized control of external source devices, such as DVD players and VCRs, when used with an optional Extron IRCM Infrared Control Module.

Vital for high traffic areas, the MLC is housed in a secure two-gang enclosure. It has the same look and functionality regardless of where it is mounted: a lectern, desk, wall, rack, or wall box.

Differences between models

The MLC 104 IP Plus models are the same as the MLC 104 Plus, but with the addition of built-in IP Link® Ethernet Control.

IP Link enables Web-based remote diagnostics, asset management, and support.

1-2 MLC 104 Plus Series • Introduction

Page 7 Page 9
Image 8
Page 7 Page 9
Contents MLC 104 Plus Series MediaLink ControllersPrecautions 安全须知 中文 MLC 104 Plus Series Safety and Compliances Table of Contents Table of Contents, cont’d One Differences between models About this ManualMLC 104 Plus Series MediaLink Controllers Typical MLC 104 IP Plus installation Introduction, cont’d About Global Configurator Installing Global Configurator Click the Global Configurator iconSystem Requirements Click the Download GCSWxxxxx.exe buttonGlobal Configurator Online Training Introduction, cont’dTwo Hardware Setup Front PanelMLC 104 Plus Series Hardware Setup Right Side PanelHardware Setup, cont’d Left Side Panel and Top Panel Power Connection Hardware Setup, cont’d LAN Connection IP Models Only LAN ConnectorFront Panel Host Configuration Port Hardware Setup, cont’d Device Connections Display connectionInfrared IR connection Digital I/O connectionComm Link connection MLS connectionHardware Setup, cont’d Three Click the Add Driver Subscriptions button Creating a Global Configurator Project FileStep one download device drivers MLC 104 Plus Series Software Setup Click the Right Arrow Subscribe buttonSoftware Setup, cont’d Step two create a new projectSelect Create a New Project For IP modelsFor an MLC 104 Plus non-IP model Step three add a device and set up its connection Click Make this device a GlobalViewer Host if desiredClick Auto Configure IP Address For an MLC 104 Plus non-IP model MLC 104 Plus Series Software Setup Step five save the new Global Configurator file Configuring a New Device Step six configure e‑mail server IP models onlyClick Tools Change Device Settings Click Settings Set Mail ServerStep seven configure e‑mail messages IP models only Click Edit Email ManagerStep eight configure contacts IP models only Click Edit Contact ManagerStep nine assign serial device drivers Click Add DriverStep ten assign IR drivers Button tool tip Step eleven configure the front panelButton caption Button repeat rate Button modes Switcher input Button operations MLC 104 Plus Series Software Setup Click User Defined Command MLC 104 Plus Series Software Setup Clear, reset, and auto fill captions Step twelve configure associated control modules Software Setup, cont’d Step thirteen create a shutdown schedule Click Apply Action Step fourteen create a lamp hour notification IP models only Click Apply Condition Click Apply Email/ContactsStep fifteen create a disconnect notification IP models only Click the Add Monitor buttonDisconnected Click Apply Condition Step sixteen build the Global Configurator file Step seventeen upload the Global Configurator file Step eighteen launch GlobalViewer IP models only Software Setup, cont’d Testing the GlobalViewer pages Extron’s Warranty USA, Canada, South America Japan Central AmericaSetup Guide Checklist

MLC 104 Plus Series specifications

The Extron Electronics MLC 104 Plus Series is an advanced control system designed for modern AV environments, providing users with intuitive and efficient management of multimedia devices. This series is particularly well-suited for classrooms, conference rooms, and other collaborative spaces, where ease of use and reliability are paramount.

One of the standout features of the MLC 104 Plus is its customizable control interface. The unit is equipped with multiple buttons, which can be programmed to operate various AV devices such as projectors, displays, and video conferencing equipment. This flexibility allows users to create tailored controls based on their specific needs, promoting a user-friendly experience.

The MLC 104 Plus incorporates Extron's proprietary technologies such as Global Configurator Plus software, which streamlines the installation and configuration process. This software simplifies programming, enabling integrators to create a customized user interface quickly. Additionally, the device supports numerous AV control protocols, ensuring compatibility with a wide range of third-party equipment.

Another significant characteristic of the MLC 104 Plus is its powerful built-in functionality. This includes support for AV data communication through Ethernet, enabling the device to operate and monitor AV systems remotely. Users can manage their systems from different locations, thus enhancing operational efficiency.

The MLC 104 Plus also features a user-friendly graphical display that provides clear feedback during operation. This built-in LCD screen shows status information and control options, ensuring users can easily access necessary controls without confusion. Its compact design allows for easy integration into any environment, whether mounted on a wall or placed on a table.

The series also emphasizes reliability through its robust construction and high-quality components, ensuring long-lasting performance in demanding environments. The MLC 104 Plus Series is designed to support secure and robust connections, reducing the potential for signal interference and enhancing the overall user experience.

In summary, the Extron MLC 104 Plus Series is a versatile, intuitive, and powerful solution for AV control, equipped with a customizable interface, extensive compatibility, and efficient setup capabilities. Its combination of advanced technology and user-friendly features makes it an ideal choice for any modern AV installation, setting a new standard in multimedia management.
Top Page Image Contents