Tuner | CD Player |
General operation
Switching on and off and selecting the function
1To select your sound source, adjust the Source selector to: CD, FM or MW.
2To switch off the set, adjust the Source selector to OFF position.
3To switch to LINE IN mode, connect an external audio source to the
Helpful hints:
•The set switches to LINE IN mode automatically when an external audio source is connected, no matter the set is in CD, FM or MW mode.
•The
Adjusting volume and sound
Adjust the sound with the VOLUME and DBB controls.
Radio reception
1Adjust the Source selector to FM or MW.
2Turn TUNING to tune to a station.
Helpful hints:
To improve radio reception
•For FM, extend, incline and turn the telescopic antenna for best reception. Reduce its length if the signal is too strong.
•For MW, the set uses a
Playing a CD
•This CD player plays Audio Discs including
•MP3,
IMPORTANT!
CDs encoded with copyright protection
technologies by some record companies may be unplayable by this product.
1Adjust the Source selector to CD.
2Open the CD door, and insert a CD with the printed side facing up, then press the CD door gently to close.
➜Display shows
3Press 2 ; to start playback.
4To pause playback, press 2;.
➜Display: 2 flashes. (See 4)
5To resume, press 2; again.
6To stop CD playback, press 9.
Helpful hints:
CD play will also stop when:
–you open the CD door;
–you select FM, MW or OFF sound source;
–the CD has reached the end.