Extron electronic FOX T USW 203 manual Picture Adjustments Analog Only, Pixel phase, Total pixels

Command	ASCII Command	Response	Additional Description
	(Host to Device)	(Device to Host)

Picture Adjustments (Analog Only)

Pixel phase

Set a pixel phase value	E1*X2#PHAS}	PhasX2#]	Adjust the pixel phase to X2#.
Increment value	E1+PHAS}	PhasX2#]	Increase the pixel phase.
Decrement value	E1-PHAS}	PhasX2#]	Decrease the pixel phase
View pixel phase value	E1PHAS}	X2#]	Show the pixel phase value
Total pixels
Set the total pixel value	E1*X2$TPIX}	TpixX2$]	Set the total pixels to X2$.
Increment value	E1+TPIX}	TpixX2$]	Increase the total pixels.
Decrement value	E1-TPIX}	TpixX2$]	Decrease the total pixels.
View total pixel value	E1TPIX}	X2$]	Show the total pixels.
Horizontal start
Set horizontal start value	E1*X2%HSRT}	HsrtX2%]	Set horizontal location of first
			active pixel in active window.
Increment value	E1+HSRT}	HsrtX2%]	Move the image to the right.
Decrement value	E1-HSRT}	HsrtX2%]	Move the image to the left.
View horizontal start value	E1HSRT}	X2%]	Show horizontal location of the
			first active pixel in active window.

NOTE: X2# = Pixel phase	0 to 63 (32 = default)
X2$ = Total pixels	±255 of the default value (depends on the input rate)
X2% = Horizontal start	0 to 255 (128 = default)

FOX T USW 203 Universal Switcher • SIS Configuration and Control 16