Mounting Accessories, Tabletop Use | Extron electronic DTP DVI 301

Mounting Accessories

Mounting kit	Part Number


RSF 123 3.5-inch deep 1U rack shelf kit (transmitter only)	60-190-20

RSB 123 3.5-inch deep 1U rack shelf (transmitter only)	60-604-21

RSU 126 6-inch deep 1U universal rack shelf kit	60-190-10

RSB 126 6-inch deep 1U basic rack shelf	60-604-11

RSU 129 9.5-inch deep 1U universal rack shelf kit	60-190-01

RSB 129 9.5-inch deep 1U basic rack shelf	60-604-02

MBU 125 under-desk mount kit	70-077-01

MBD 129 through-desk mount kit	70-077-02

PMK 350 low profile projector mount kit, white	70-563-03

Mounting the Transmitter or Receiver

CAUTION: Installation and service must be performed by authorized personnel only.

The 1-inch high, quarter rack width DTP DVI 301 transmitter or receiver can be placed on a table, mounted in a rack, or mounted under a desk or table. The receiver can also be mounted on a projector bracket.

Tabletop Use

Affix the included rubber feet to the bottom of the unit and place it in any convenient location.

Mounting kits

Mount the unit using any of the mounting kits listed above, in accordance with the directions included with the kit.

UL Rack-Mounting Guidelines

The following Underwriters Laboratories (UL) requirements pertain to the installation of the unit into a rack.

1.Elevated operating ambient temperature — If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consider installing the equipment in an environment compatible with the maximum ambient temperature (TMA = +122 °F, +50 °C) specified by Extron.

2.Reduced air flow — Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised.

3.Mechanical loading — Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading.

4.Circuit overloading — Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.

5.Reliable earthing (grounding) — Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (such as use of power strips).

DTP DVI 301 • Reference Information 16

DTP DVI 301 specifications

Extron Electronics is renowned for producing high-quality signal processing and distribution solutions, and the DTP DVI 301 stands out as a versatile and efficient tool for transporting DVI signals. This device is part of the DTP (Digital Twist Pair) series, designed to simplify AV system installations while maintaining signal integrity over long distances.

The DTP DVI 301 is equipped with key features that make it a preferred choice for both commercial and residential applications. One of its primary functionalities is its ability to extend DVI signal up to 300 feet (90 meters) over a single twisted pair cable. This capability ensures that high-resolution video signals can be transmitted without degradation, making it ideal for environments where distance between the source and display device is significant.

A standout characteristic of the DTP DVI 301 is its support for HDCP (High-bandwidth Digital Content Protection), which is crucial for ensuring compatibility with various digital content sources like Blu-ray players and streaming devices. This feature allows users to transmit protected content without interruption, thereby maintaining compliance with industry standards.

The unit supports resolutions up to 1920x1200 at 60Hz, allowing for sharp and clear images suitable for a range of applications from corporate presentations to home theaters. Furthermore, it includes an automatic input cable equalization feature, which compensates for signal loss that can occur over longer run times, ensuring robust signal integrity.

The DTP DVI 301 also incorporates Extron’s patented DTP technology, which intelligently manages the transmission of digital video, audio, and control signals through a single cable. This integrated solution reduces the complexity of installations while providing reliable performance.

Additionally, the device features a compact design suited for easy mounting in AV racks or discreet installation in conference rooms. It includes an LED status indicator that provides immediate feedback on power and signal availability, enhancing user experience during operation.

Ease of use is further emphasized with its simple plug-and-play setup, requiring minimal configuration, making it accessible even for users with limited technical expertise. The DTP DVI 301 is a durable, feature-rich solution that not only meets the demanding needs of modern AV systems but also simplifies installation processes, ultimately benefiting integrators and users alike.