Extron electronic MLM 104 4GWP, MLM 104 2GWP manual MLM 104 Faceplates Installation Guide

MLM 104 Faceplates Installation Guide

MLM 104 Faceplates

This guide provides instructions for installing the following Extron MediaLink™

Mounting Options faceplates, which are designed for use with MLC 104 IP Plus

MediaLink Controllers.

The MLM 104 L, MLM 104 2GWP, or MLM 104 4GWP faceplate is shipped with the MLC 104 IP Plus controller, depending on the controller configuration that is ordered. The rest of the mounting options described below may be ordered separately as replacements, or for use with an MLC 104 IP Plus that is ordered without a faceplate.

•MLM 104 L — A low-profile, 3.15" H x 6.50" W (8.0 cm H x 16.5 cm W) lectern/furniture-mounting faceplate. This faceplate is required when you are mounting an MLC 104 IP Plus using an optional UCM RAAP or UCM 10X8P mounting kit.

Part numbers: 70-357-02 (black), 70-357-03 (white), 70-357-05 (RAL9010 white)

•MLM 104 LAAP — A low-profile, 3.15" H x 10.00" W (8.0 cm H x 25.40 cm W) lectern/furniture-mounting faceplate with an opening that accommodates four single-space AAPs

Part numbers: 70-358-02 (black), 70-358-03 (white), 70-358-05 (RAL9010 white)

68-878-01, Rev. D

08 07

MLM 104 Faceplates • Installation Guide 1