Extron electronic IN1404XT manual Problem Possible cause Solution Image is cropped

Problem	Possible cause	Solution
The image is cropped	Input horizontal	Select Input>Advanced>
on the right.	blanking may be set too	H. Blanking and increase the
	low.	setting to match the input signal.
	Horizontal position	Reduce the horizontal position
	may be set too far to	setting.
	the right.
	Display may be set	Use the blue screen and the
	incorrectly.	display’s position or size controls
		to fit the image on the display.
The image is cropped	Input vertical blanking	Select Input>Advanced>
on the top.	may be set too high.	V. Blanking and reduce the setting
		to match the input signal.
	Vertical position may	Increase the vertical position
	be set too far to the top.	setting.
	Display may be set	Use the blue screen and the
	incorrectly.	display’s position or size controls
		to fit the image on the display.
The image is cropped	Input vertical blanking	Select Input>Advanced>
on the bottom.	may be set too low.	V. Blanking and increase the
		setting to match the input signal.
	Vertical position may	Reduce the vertical position
	be set too far to the	setting.
	bottom.
	Display may be set	Use the blue screen and the
	incorrectly.	display’s position or size controls
		to fit the image on the display.
Double image.	Multiple formats	Ensure only one signal is
	connected to a single	connected to each input.
	input.
	(Interlaced component	Select Input>Advanced>Scan Type
	and RGB video) Even	and then select Invert Sync.
	and odd fields
	improperly detected.
Black & white image	Signal format	Select Input>Signal Format and
only.	incorrect.	ensure that signal format selected
		matches the signal input.
Hooking along the	Horizontal tracking	Select Input>Horiz Tracking and
top of the image.	too slow.	increase the tracking speed.
	(RGBS and RGsB	Select Output>Sync Format and
	video) Incorrect	select pulses on (A) if off (B) or
	serration pulses status.	turn pulses off if on.
Frozen image.	Freeze is activated.	Press freeze to deactivate the
		feature.
Displayed image is	Input aspect ratio	Select Input>Aspect Ratio and
the wrong shape.	incorrect.	select the correct aspect ratio.
	Output aspect ratio	Select Output>Resolution and
	incorrect.	select a resolution to match the
		display.

IN1404XT Video Scaler and Switcher • Operation 3-33