Extron electronic IN1404XT manual Color saturation, Hue, Sharpness

Programmer’s Guide, cont’d

Command/Response Table for RS-232 Commands (Cont’d)

Command	ASCII Command	Response	Additional description
	(host to scaler)	(scaler to host)
Set blue gain value to default	[BLU@]	[OK]	Reset the blue gain setting to its
			factory default (128).
View the blue gain value	[BLU?]	[ X8 ]	Show the blue gain setting.

Color saturation

1. Color saturation adjustments are available only for NTSC interlaced component video, S-video, and composite video inputs only.

2. No video adjustments are available for the input 4 video signal when it is configured as passive (unscaled).

Set a specific color saturation value [SAT

X8 ]	[OK]	Specify the color saturation
		adjustment.

Increment color saturation value	[SAT+]	[OK]	Increase the color saturation
			setting by one.
Decrement color saturation value	[SAT-]	[OK]	Decrease the color saturation
			setting by one.
Set color saturation value to default [SAT@]		[OK]	Reset the color saturation setting
			to its factory default (128).
View the color saturation value	[SAT?]	[ X8 ]	Show the color saturation setting.

Hue

		1.	Hue adjustments are available only for NTSC interlaced component
	2.		video, S-video, and composite video inputs only.
			No video adjustments are available for the input 4 video signal when it is
			configured as passive (unscaled).
Set a specific hue value	[HUE X8 ]			[OK]	Specify the hue adjustment.
Increment hue value	[HUE+]			[OK]	Increase the hue setting by one.
Decrement hue value	[HUE-]			[OK]	Decrease the hue setting by one.
Set hue value to default	[HUE@]			[OK]	Reset the hue setting to its
					factory default (128).
View the hue value	[HUE?]			[ X8 ]	Show the hue setting.
Sharpness
		1.	Sharpness adjustments are available only for interlaced component video,
	2.		S-video, and composite video inputs only.
			No video adjustments are available for the input 4 video signal when it is
			configured as passive (unscaled).
Set a specific sharpness value	[SHP X9 ]			[OK]	Specify the sharpness
					adjustment.
Increment sharpness value	[SHP+]			[OK]	Increase the sharpness setting by
					one.
Decrement sharpness value	[SHP-]			[OK]	Decrease the sharpness setting
					by one.
Set sharpness value to default	[SHP@]			[OK]	Reset the sharpness setting to its
					factory default (3).
View the sharpness value	[SHP?]			[ X9 ]	Show the sharpness setting.

4-8 IN1404XT Video Scaler and Switcher • Programmer’s Guide