Extron electronic MTPX 168, MTPX Series, MTPX 1616, MTPX 3232, MTPX 816 Optimizing the video

Page 23

Remote Control and Optimizing the Video, cont’d

Optimizing the video

Most MTP transmitters and half of the MTPX TP outpust have a pre-peaking feature. Many MTP receivers have level/peaking and skew adjustments. Set these features as follows for the best image quality:

1. For inputs from MTP T 15HD products only — If the cable between the MTP transmitter and the MTPX Plus is > 300', turn the transmitter’s Pre-Peak switch on. For shorter cables, turn the switch off.

2. For outputs — If the cable between the MTPX and the receiver is > 300', turn the MTPX’s Pre-Peak feature on. For shorter cables, turn the feature off. Set the feature as follows:

a. In the Matrix Switchers Control Program, click Tools > MTPX Config settings and then check or uncheck the appropriate Pre-Peaking box.

NMTPX Pre-Peak is available on the first half of the MTPX Plus outputs (for example outputs 1 through 4 for an MTPX Plus 168.

NUnless the TP cable lengths are changed, these settings should need to be made only once, during installation.

3. If level/peaking and skew adjustments are available on the connected receiver(s), set them in accordance with the applicable MTP product manual.

4-12 MTPX • Remote Control and Optimizing the Video

Refer also to the MTPX User’s Manual at www.extron.com.

Page 22 Page 23
Image 23
Page 22 Page 23
Contents Mini Twisted Pair Matrix Switchers Setup GuideExtron’s Warranty PrecautionsFCC Class a Notice 安全须知 中文Table of Contents Introduction Mtpx Twisted Pair Matrix SwitcherTable of Contents, cont’d OneMtpx About the Mtpx SwitchersIntroduction About this ManualVideo format Mtpx Pre-Peak Maximum distance Off High Recommended transmission distances at 60 HzIntroduction, cont’d InstallationTwo Inputs InstallationRear Panel Front Panel Installation, cont’dRemote control PowerFront Panel Operation ThreeCreating a Tie Saving or Recalling a PresetFront Panel Operation Selecting Lock mode 2 or toggling between mode 2 and mode Release the Control buttons ControlPress and release the Audio button to exit Viewing Ties and Muting OutputsPress and hold the Audio button until the Audio LED flashes Front Panel Operation, cont’d Remote Control Optimizing the VideoFour Host-to-switcher instructions Remote Control and Optimizing the VideoSelected SIS Commands Create ties Command Ascii command Response Additional descriptionLocal video output sync polarity Remote Control and Optimizing the Video, cont’dAudio/RS-232 TP input wire pair 3 and 6 configuration Output pre-peakingAudio input gain and attenuation Remote Control and Optimizing the Video, cont’dAudio or RS-232 mute commands Audio output volumeInformation requests Save and recall presetsLock executive modes Click the Software tab Installing the programStarting the program Optimizing the video

MTPX 1616, MTPX 816, MTPX 3216, MTPX 1632, MTPX 168 specifications

Extron Electronics is renowned for its commitment to high-quality audio-visual distribution solutions, and the MTPX Series is no exception. The MTPX Series features a range of versatile matrix switchers designed to accommodate various AV signal formats, including composite video, S-Video, and RGBHV. Among the models in this series, the MTPX 3232, MTPX 168, MTPX 1632, and MTPX 3216 stand out for their advanced technology and user-friendly features, making them ideal for many applications.

The MTPX 3232 offers robust capabilities with 32 inputs and 32 outputs, providing high flexibility for large installations where multiple source devices need to be routed to multiple displays. Each output can be individually controlled, allowing seamless switching between different sources with minimal delay. This model supports a range of video formats, ensuring compatibility with various equipment.

For smaller installations, the MTPX 168 and MTPX 1632 models present excellent alternatives. The MTPX 168 is designed with 16 inputs and 8 outputs, providing efficient routing for systems that require fewer connections. Meanwhile, the MTPX 1632 has 16 input and 32 output configurations, ensuring versatile signal routing for enhanced scalability. These models employ Extron's robust technology, such as the proprietary Extron XTP technology, which delivers high-performance signal distribution over long distances.

The MTPX 3216 model adds another dimension with its 32 input and 16 output setup, offering a balanced solution for various AV needs while maintaining excellent signal integrity. All models feature advanced video processing technologies that help eliminate flickering and ensure high-quality video performance even in demanding environments.

A significant feature across the MTPX Series is the built-in web interface, which simplifies the configuration, monitoring, and control of the matrix switchers. This user-friendly platform allows technicians to manage inputs and outputs remotely, ensuring seamless transitions during events and presentations. Furthermore, Extron's advanced EDID Management ensures optimal performance by allowing the switchers to communicate effectively with connected devices.

With exceptional build quality and user-centric features, the Extron MTPX Series stands out as a reliable choice for professional AV installation, enhancing the way audio and video signals are managed in various settings. Whether for a classroom, boardroom, or large venue, these models provide the versatility and performance needed to create impactful AV experiences.
Top Page Image Contents