Philips AZ1046/12 user manual Connect AC power

Page 8

2Insert 6 x 1.5V R14/UM-2/C-cell batteries with correct polarity (+/-) as indicated.

3Close the battery compartment.

Tip

If you want to save battery life, use the supplied power cord.

Connect AC power

Warning

Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the product.

Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord.

Note

Install the unit near the power supply socket and where the AC power plug can be easily reached.

1Connect the power cord to the AC MAINS~ socket on the CD Soundmachine and to the power supply socket.

To switch the CD Soundmachine off completely, disconnect the power cord from the power supply socket.

Tip

To save energy: After use, set the source selector to OFF.To turn off the CD Soundmachine, disconnect the plug from the power supply socket.

Image 8
Contents Register your product and get support at Safety Important Safety InstructionsPage Recycling Your CD Soundmachine IntroductionWhat’s in the box Overview of the main unitPage Always follow the instructions in this chapter in sequence Install batteriesGet started Connect AC power Use your CD Soundmachine Play a CDSelect a track Select an albumFind a passage within a track Select play modesRepeat play Shuffle playProgram play sequence Listen to radioTroubleshooting No powerNo sound Cannot play discProduct information