Philips AZ1046/12 Troubleshooting, No power, No sound, Cannot play disc, CD skips tracks

Page 12

Tip

To improve FM reception, you can extend, incline or turn the telescopic antenna for best reception.

To improve MW reception, turn the CD Soundmachine to face a different direction.

5 Troubleshooting

Warning

Risk of electric shock. Never remove the casing of the player.

To keep the warranty valid, never try to repair the system yourself.

If you encounter problems when using the player, check the following points before requesting service. If the problem remains unsolved, register your player and get support at www.philips.com/ welcome.

No power

Ensure that the power cord is connected securely.

Ensure that there is power at the power supply socket.

Ensure that the batteries are installed correctly.

No sound

Adjust the volume.

Ensure that the track played is of a compatible format.

Display does not function properly./No reaction to operation of any of the controls.

1Disconnect the AC power cord.

2Connect the AC power cord after a few seconds.

Cannot play disc

• Ensure that the disc label is inserted with the printed side facing up.

• Wipe the disc with fibre cleaning cloth from the centre to the edge in a straight line.

• This disc may be defective. Play another disc.

• Ensure that the CD is a finalised CD/CD-R/CD-RW.

• Ensure that the laser lens is clean.

• Ensure that the CD is not encoded with copyright protection technologies.

The CD skips tracks

Image 12
Contents Register your product and get support at Safety Important Safety InstructionsPage Recycling Your CD Soundmachine IntroductionWhat’s in the box Overview of the main unitPage Install batteries Get startedAlways follow the instructions in this chapter in sequence Connect AC power Use your CD Soundmachine Play a CDSelect a track Select an albumFind a passage within a track Select play modesRepeat play Shuffle playProgram play sequence Listen to radioTroubleshooting No powerNo sound Cannot play discProduct information