Extron electronic MPS 112CS manual Front panel security lockout Executive mode, Program audio

Page 21

Front panel security lockout (Executive mode)

To prevent unauthorized changes, Executive mode locks all functions except input selection functions and Program Audio Volume control. To toggle the Executive mode on or off, press and hold the Mode button for more than 2 seconds until the front panel LEDs change to View mode, then press and release the fourth input button of the VGA/Audio group. The Exec Mode LED turns on to indicate that Executive mode is on, and it turns off to indicate Executive mode is off. Release the Mode button when your selection has been made.

Program audio

Single Switcher mode

In Single Switcher mode, audio from the one selected input is routed to the program audio output.

Separate Switcher mode

In Separate Switcher mode, the selected audio input from one of the three input groups is routed to the program audio output. The selected input and group is indicated by a flashing input LED. The LEDs of the two remaining, unselected groups (inputs) are steadily lit.

To route a different audio input within the same input group to the program audio output, press one of the other input buttons within that group. The flashing LED moves to the new input. See the illustrations below.

To route an audio input from a different group to the program audio, press the input button once if the input is already active and its LED is steadily on, or twice if the input is not active and its LED is off. The flashing LED moves to the new input within the new group. See the illustrations below.

1.

EXEC.MODE

 

VGA / AUDIO

 

 

S-VIDEO / AUDIO

 

 

VIDEO / AUDIO

 

1

2

3

4

1

2

3

4

1

2

3

4

 

MODE

SINGLE

SEPARATE

 

 

 

 

 

 

PROG VOL RESET

MIC VOL RESET

MIC POWER ON/OFF

Press and hold the Mode button and press the Separate button to

select Separate Switcher mode.

LEDs for the last- selected inputs in the other switching groups light steadily.

2.

NOTE The mode does not change until the Mode button is released.

To select a different

 

S-VIDEO / AUDIO

 

 

 

 

S-VIDEO / AUDIO

 

1

2

3

4

 

 

1

2

3

4

input in the same input

 

 

 

 

 

 

 

 

 

 

group:

 

 

 

 

 

 

 

 

 

 

 

Press a different button

 

 

 

 

The newly selected

 

 

in the same input group.

 

 

 

 

input’s LED flashes.

 

To select an input in a

 

VGA / AUDIO

 

 

S-VIDEO / AUDIO

 

 

 

1

2

3

4

1

2

3

4

 

 

different input group:

 

 

 

 

 

 

 

 

 

 

 

MODE

SINGLE

SEPARATE

 

 

 

 

 

 

 

Press a button in a different input group

•once (1x) if the input is active and its LED is lit or

•twice (2x) if the input is not active and its LED is not lit

 

VGA / AUDIO

 

 

S-VIDEO / AUDIO

 

1

2

3

4

1

2

3

4

MODE

SINGLE

SEPARATE

 

 

 

 

 

The newly selected input’s LED flashes, indicating that it is the source for program audio.

MPS 112 Series • Operation 3-5

Page 20 Page 22
Image 21
Page 20 Page 22
Contents MPS 112 and MPS 112CS Precautions Connecting the MPS switcher RS-232 remote connectorRS-232 remote connector pinout table Quick Start MPS SeriesOptimizing the audio Quick Start MPS Series, cont’dTable of Contents Table of Contents, cont’d Introduction OneIntroduction MPS Series FeaturesAbout the MPS Series MPS Series IntroductionTwo InstallationMounting the Switcher InstallationMPS Series Installation Rack mountingThrough-desk mounting Table or wall mountingRear Panel Connectors Installation, cont’dConnecting the MPS Switcher Audio input and output Connecting the RCA audio connectorsConnecting the 3.5 mm mini-plugs Connecting the 1/4 6.3 mm microphone connector MPSMicrophone input Remote connection Program audio output MPS 112CSOperation ThreeOperation Front Panel FeaturesVideo/audio group buttons Microphone and Program Audio controlsInput selection in Separate Switcher mode Input selection in Single Switcher modeSwitcher Mode controls Front Panel OperationView mode Determining and selecting the switcher modeOperation, cont’d Single Switcher mode Front panel security lockout Executive modeSeparate Switcher mode Program audioReset program audio volume Program audio volumeProgram audio breakaway Follow sub-modeMicrophone controls Operation, cont’d Windows-based Control Program FourUsing the Software Installing the Windows-based Control SoftwareWindows-based Control Program MPS Series Windows-based Control ProgramMPS Control Program File menu Uploading Firmware UpdatesWindows-based Control Program, cont’d Firmware update confirmation windowProgrammer’s Guide FiveMPS switcher-initiated messages Remote Control Port RS-232Programmer’s Guide Host-to-MPS CommunicationsMPS switcher error responses Command/Response TableUsing the command/response table Symbol definitionsProgrammer’s Guide, cont’d Command/response table for SIS commandsMic level Command Ascii Command Response DescriptionSpecial functions Switcher mode selectUploading firmware to the MPS via an SIS command Programmer’s Guide, cont’d Reference Information AAppendix aSpecifications Reference InformationMPS Series Reference Information MPS Series Reference Information A-3 SyncAudio program audio Reference Information, cont’dMPS Series Reference Information A-5 Microphone inputOptional accessories Part NumbersIncluded parts Cables and connectors VGA M to BNC M cable Part number Pre-cut cables VGA M-M with audio cable Part numberVideo M-M cable Part number Audio cable Part numberFCC Class a Notice Extron’s Warranty Extron Electronics, Europe Beeldschermweg 6C
Related manuals
Manual 44 pages 29.11 Kb

MPS 112CS, MPS 112 specifications

Extron Electronics is a recognized leader in professional AV system integration, and its MPS 112 and MPS 112CS are prime examples of their commitment to delivering quality performance and user-friendly interfaces. These Multi-Format Presentation Switchers are designed to enhance the quality and efficiency of presentations in any environment, making them ideal for classrooms, meeting rooms, and other venues.

The MPS 112 is a versatile switcher that can handle various input types, accommodating multiple AV devices. It features a selection of input connectors, including HDMI, VGA, and audio connections, allowing users to seamlessly integrate laptops, document cameras, and other multimedia sources. This multi-format capability ensures that presenters can connect their devices with minimal hassle, fostering a smooth presentation experience.

One of the standout features of the MPS 112 is its built-in scaling technology. This presents a significant advantage by enabling the output resolution to be adjusted according to the capabilities of the display devices connected, ensuring compatibility and optimal visual quality. Furthermore, the device supports automatic input switching, which intelligently selects the active source, simplifying the switching process during presentations.

With the MPS 112CS, Extron has introduced a model equipped with additional functionalities, including integrated audio amplification and support for microphone inputs. This model is designed to be even more user-friendly, catering to environments where audio support is crucial. Its built-in amplifier can drive speakers directly, reducing the need for external audio equipment while maintaining high-quality sound output.

Both models come with Extron’s exclusive Simple Instruction Set (SIS) technology, allowing for quick setup and configuration. This feature ensures that users can manage the switcher effortlessly, decreasing the likelihood of technical difficulties during presentations. Additionally, the MPS 112 and MPS 112CS both come with an intuitive front panel, complete with buttons for source selection and volume control, promoting an accessible user experience.

In terms of build quality, Extron devices are known for their reliability and durability, and the MPS series is no exception. Housed in a robust chassis, these switchers are designed to withstand the rigors of regular use while providing consistent performance.

In conclusion, the Extron MPS 112 and MPS 112CS are sophisticated yet user-friendly AV presentation switchers equipped with essential features for effective multi-source presentations. With their advanced technologies, versatile inputs, and reliable performance, they continue to be valuable assets in professional AV setups.
Top Page Image Contents