Extron electronic MPS 409 manual Hdcp

User assigned EDID Mode — Using SIS commands, an EDID file can be selected from a table of 19 EDID files. One additional EDID file location is reserved for user-loaded EDID files for the VGA and DVI groups. Once a user assigned EDID is chosen, the switcher stores it at the inputs and no longer polls for the EDID of a connected display. The chart below lists the native resolution of each factory EDID file and timing characteristics associated with each.

EDID Resolution Table

EDID		Native Resolution		Refresh	Pixel Clock
0		Automatic Mode
1		800 x	600	60 Hz	40 MHz
2		1024 x	768	60 Hz	65 MHz
3		1280 x	768	60 Hz	79.5	MHz
4		1280 x	800	60 Hz	83.5	MHz
5		1280 x	1024	60 Hz	108 MHz
6		1360 x	768	60 Hz	85.5	MHz
7		1440 x	900	60 Hz	106.5	MHz
8		1400 x	1050	60 Hz	121.75	MHz
9		1680 x	1050	60 Hz	119 MHz
10		1600 x	1200	60 Hz	162 MHz
11		1920 x	1200	60 Hz	154 MHz
12		720p, basic audio		50 Hz	74.25	MHz
13		720p, basic audio		60 Hz	74.25	MHz
14		720p, full audio		50 Hz	74.25	MHz
15		720p, full audio		60 Hz	74.25	MHz
16		1080p, basic audio		50 Hz	148.5	MHz
17		1080p, basic audio		60 Hz	148.5	MHz
18		1080p, full audio		50 Hz	148.5	MHz
19		1080p, full audio		60 Hz	148.5	MHz
20		User loaded
NOTE:	Basic Audio supports: 2-Ch PCM audio
	Full Audio supports: 2-Ch PCM, 8-Ch PCM, 8-Ch AC-3, 8-Ch DTS,
	8-Ch DD+, 8-Ch DTS-HD, & 8-Ch Dolby TrueHD

NOTE: Basic audio = 2-channel PCM audio

Full audio = support for various digital encoding formats and up to 8-channel audio

If the display connected to the VGA output of the switcher does not support DDC, or the switcher does not obtain EDID from the output, the default resolution (2) is used.

HDCP

The DVI and HDMI groups are HDCP compliant. When EDID Minder is enabled, (default), HDCP is not supported on the DVI inputs.

HDCP communication occurs between the selected input source and the output device directly (pass-though).

MPS 409 • Operation 19