Extron electronic manual Cabling the MPS 409 Switcher

Page 15

Cabling the MPS 409 Switcher

The MPS switcher can be connected to as many as 9 input devices simultaneously. It can output to as many as four devices (three in combine mode) simultaneously. Outputs can be configured for simultaneous outputs from each of the four input groups, VGA/YUV, DVI-D, HDMI, composite or one at a time from a selection of the nine inputs. Follow the steps below and see the installation example in figure 1.

1.Turn off power to the MPS switcher and all devices that will be connected to it.

2.If the MPS switcher is to be rack, table/wall, or through-desk mounted, position the brackets and insert the mounting screws. See Mounting the Switcher on page 4.

3.Attach up to two VGA, three HDMI, two DVI-D, and two composite video input devices to the MPS switcher. See Rear Panel Connections on page 6.

4.Connect the switcher VGA, HDMI, DVI and Composite video outputs (up to four, one of each video format) to the appropriate display device inputs. See Rear Panel Connections on page 6.

5.For stereo audio input, connect up to 9 audio sources to the corresponding audio inputs of the VGA, HDMI, DVI, or composite video groups. See Rear Panel Connections on page 6.

6.For stereo output, connect an audio output device to each of the four groups and an audio amplifier to the Program Audio connectors. See Rear Panel Connections on page 6.

7.If the switcher is to be connected to a computer or host controller for remote control, connect the host RS-232 cable to the 3-pole captive screw connector (k) of the switcher. For an RS-232 pinout table, see Remote Control Port (RS-232) on page 20 .

8.Power up the input and output devices, then connect power to the rear AC connector of the MPS switcher.

MPS 409 • Installation

9

Page 14 Page 16
Image 15
Page 14 Page 16
Contents User Guide Precautions Unit to ensure compliance with FCC emissions limits FCC Class a NoticePage Contents MPS 409 Switcher Contents About the MPS FeaturesIntroduction About this User GuideMPS 409 Introduction Extron MLC 226 IP ExtronExtron XPA Installation Mounting the SwitcherUL Rack Mounting Guidelines MPS 409 Installation Rear Panel Connections Connecting the 3.5 mm mini-plugsConnecting the 3-pole captive screw RS-232 connector Connecting the 3-pole captive screw microphone connectorPhantom Power and Mic/Line Input selection Two Connecting the 5-pole captive screw stereo output connectorCabling the MPS 409 Switcher Front Panel Features OperationVideo/Audio Group Buttons Microphone and Program Audio Controls Switcher Mode ControlFront Panel Operation Switcher Operating ModesView Mode Switcher operating modes areInput Selection Single Switcher Mode Input Selection Separate Switcher ModeProgram Audio Breakaway Input selection Separate-combine mode Combine ModeFront Panel Security Lockout Executive mode Input selection Single-combine modeProgram Audio Mute Program Audio Volume ControlProgram Audio Program Audio SelectionAudio Gain and Attenuation Adjustments To adjust the input audio level fromFront panel Mic on/off Mic volumeSetting mic talk-over threshold Microphone ControlsEdid Minder Input Group Default EdidHdcp Remote Control Port RS-232 SIS Programming ControlConnection Options Host-to-MPS Communications USB Configuration PortMPS Switcher-initiated Messages MPS Switcher Error ResponsesCommand/Response Table Using the Command/Response TableSymbol definitions Description Command/response table for SIS commandsCommand Ascii Command ResponseX1 V/v Vol X1*X1 Command Ascii Command Response Description# Edid Edid Format Cross-reference Table All Programs Extron Firmware Loader Firmware Loader program To access the firmware uploaderUpdating Firmware Download the latest firmware fileReference Information SpecificationsSync VGA and composite video groups Video outputAudio program audio General Control/remote switcherAudio output program audio Microphone inputEMI/EMC Included Parts Part Numbers and AccessoriesOptional Accessories Included parts Replacement part NumberCables and Connectors Pre-cut CablesBulk Cable BNC compression connectors qty. = Part number Assorted ConnectorsCrimp connectors qty. = Part number Solder connectors qty. = Part numberEurope USA, Canada, South America Japan Central AmericaEurope, Africa, and the Middle China East Asia Middle East

MPS 409 specifications

The Extron MPS 409 is a sophisticated multimedia presentation switcher designed to streamline the integration of audio and video in various environments, such as classrooms, conference rooms, and auditoriums. This versatile device is well-known for its ability to simplify the control of multiple sources and enhance the overall presentation experience.

One of the standout features of the MPS 409 is its extensive input capability. This switcher supports a variety of input formats, including HDMI, VGA, composite, and audio, allowing users to connect a wide range of devices such as laptops, projectors, and document cameras. The ability to switch between different input sources with ease is essential for maintaining a seamless flow during presentations, making it a critical tool for educators and presenters alike.

The MPS 409 is equipped with advanced technologies that ensure high-quality signal processing and transmission. The device supports resolutions up to 4K, providing crisp and clear visuals for viewers. Additionally, the integrated scaling feature allows users to select the optimal output resolution for connected displays, ensuring compatibility with a variety of screen sizes and formats.

Another notable characteristic of the MPS 409 is its user-friendly interface. The front panel features intuitive buttons and an LCD display for easy navigation and control. This design makes it accessible for users of all skill levels, enabling quick adjustments during a presentation without complicated procedures. Furthermore, the device supports remote operation through the Extron Control System, enhancing its flexibility in larger setups.

The MPS 409 also includes built-in audio features, such as an integrated amplifier and multiple audio inputs. This ensures that audio playback is synchronized with video outputs, delivering a cohesive audio-visual experience to the audience. The device's compatibility with various audio formats further enhances its functionality, catering to diverse presentation needs.

In conclusion, the Extron MPS 409 multimedia presentation switcher is a powerful tool that combines extensive connectivity, high-quality signal processing, and user-friendly control. Its versatility and support for advanced features make it an excellent choice for anyone seeking to enhance their presentation capabilities in professional and educational environments.
Top Page Image Contents