Introduction
About this Manual
This manual contains information about the Extron SW2 VGAcc and SW2 RGBHVcc switchers, detailing how to operate and configure them.
SW2 VGAcc and SW2 RGBHVcc switchers
The SW2 VGAcc and SW2 RGBHVcc are input switchers, each with one buffered output and 350 MHz
The SW2 VGAcc accepts the following signals:
•RGBHV (VGA/SVGA/XGA/XGA2/UXGA)
•RGBS
•RGsB
•RsGsBs
The SW2 RGBHVcc accepts the following signals:
•RGBHV
•RGBS
•RGsB
•RsGsBs
•component video
•
•composite video
With an optional Mac/VGA adapter, both switchers can switch Macintosh signals.
| Extron | |||||
| SW2 VGAcc | Contact Closure | ||||
| Switcher | with Tally LEDs | ||||
| TPU | T |
|
|
|
|
OU |
|
|
|
|
| |
|
|
|
| GA | cc |
|
| SW | 2 | V |
|
|
|
|
|
|
|
|
| |
| UTS | 2 |
INP |
| |
|
|
1
LCD
Projector
Computer
Laptop
Figure 1-1 — Typical SW2 VGAcc switcher application
These switchers are housed in 1U, half rack, and 6" deep enclosures with internal universal 100 - 240 VAC 50/60 Hz power supplies. Both models provide contact closure and tally out remote control and feedback capability.
Front panel buttons or contact closure can be used for input selection.
The SW2 VGAcc and SW2 RGBHVcc are high performance video switchers. These switchers are designed to route high resolution source signals to a video projector, monitor, or LCD panel. Users may select the desired input channel using the front panel Channel Select button or via remote control by using a wired remote, a
Features
350 MHz Video Bandwidth — The SW2 models provide high performance,
Front Panel Channel Selection Button and LED indicators
Contact closure /Tally Out — Contact closure allows for remote selection of an input channel using contact closure.
A tally out status pin provides feedback to a control system to indicate which input is currently selected.
SW2 VGAcc and SW2 RGBHVcc • Introduction | SW2 VGAcc and SW2 RGBHVcc • Introduction |