Extron electronic SW2 RGBHVCC, SW2 VGACC user manual Specifications, Part Numbers, and Accessories

Page 14

Specifications, Part Numbers, and Accessories

Specifications

Video

Gain

Unity

Bandwidth

350 MHz (-3 dB)

Crosstalk

<-68dB @ 10 MHz

Switching speed

5 ms (max.)

Video input

Number/signal type

 

SW2 VGAcc

2 VGA–UXGA RGBHV, RGBS, RGsB,

 

RsGsBs computer video

SW2 RGBHVcc

2 RGBHV, RGBS, RGsB, RsGsBs,

 

component video, S-video, composite

 

video

Connectors

 

SW2 VGAcc

2 female 15-pin HD

SW2 RGBHVcc

2 x 5 female BNC

Nominal level

1 Vp-p for Y of component video and S-

 

video, and for composite video

 

0.7 Vp-p for RGB

 

0.3 Vp-p for R-Y and B-Y of component

 

video, and for C of S-video

Minimum/maximum levels

Analog: 0.3 V to 1.5 Vp-p with no offset

Impedance

75 ohms

Horizontal frequency

15 kHz to 145 kHz

Vertical frequency

30 Hz to 179 Hz

Return loss

<-42 dB @ 5 MHz

DC offset (max. allowable)

1.7 V

Video output

Number/signal type

 

SW2 VGAcc

1 VGA–UXGA RGBHV, RGBS, RGsB,

 

RsGsBs computer video

SW2 RGBHVcc

1 RGBHV, RGBS, RGsB, RsGsBs,

 

component video, S-video, composite

 

video, (follows input type)

Connectors

 

SW2 VGAcc

1 female 15-pin HD

SW2 RGBHVcc

5 female BNC

Nominal level

1 Vp-p for Y of component video and S-

 

video, and for composite video

 

0.7 Vp-p for RGB

 

0.3 Vp-p for R-Y and B-Y of component

 

video, and for C of S-video

Minimum/maximum levels

0.3 V to 1.5 Vp-p (follows input)

Impedance

75 ohms

Return loss

<-43 dB @ 5 MHz

DC offset

±5 mV with input at 0 offset

Sync

Input type

RGBHV, RGBS, RGsB, RsGsBs

Output type

RGBHV, RGBS, RGsB, RsGsBs (follows

 

input)

Input level

Analog or TTL, 1.7 V to 5.0 Vp-p

Output level

5.0 Vp-p, unterminated

Input impedance

510 ohms

Output impedance

50 ohms

Max. propagation delay

30 ns

Max. rise/fall time

4 ns

Polarity

Positive or negative (follows input)

Control/remote — switcher

Contact closure/tally

(1) 3.5 mm captive screw connector, 5 pole

Contact closure and tally pin configurations

1 = input 1 contact closure, 2 = input 2 contact closure, 3 = GND,

4 = input 1 tally output, 5 = input 2 tally output

General

Power

100 VAC to 240 VAC, 50/60 Hz, 7 watts,

 

internal, autoswitchable

Temperature/humidity

Storage -40° to +158°F (-40° to +70°C) /

 

10% to 90%, noncondensing

 

Operating +32° to +122°F (0° to +50°C) /

 

10% to 90%, noncondensing

Rack mount

Yes, with optional 1U rack shelf,

 

part #60-190-01, 60-190-10, 60-604-01,

 

or 60-604-10

 

Also furniture mountable with an optional

 

Under-desk Mounting kit, #70-077-01

Enclosure type

Metal

A-2 SW2 VGAcc and SW2 RGBHVcc • Reference Information

SW2 VGAcc and SW2 RGBHVcc • Reference Information A-3

Image 14
Contents VGA and Rgbhv switchers User’s ManualPrecautions Extron’s WarrantyWire the contact closure/tally out Quick Start Guide SW2 VGAcc and SW2 RGBHVccTable of Contents Introduction Table of Contents, cont’dOne SW2 VGAcc and SW2 RBGHVccFront Panel Channel Selection Button and LED indicators SW2 VGAcc and SW2 RGBHVcc switchersFeatures IntroductionIntroduction, cont’d InstallationTwo Mounting the Switcher InstallationInstallation Overview Rack mountingSignal input and output connections Rear Panel Features and ConnectionsPower connection Through-desk mountingThree Installation, cont’dOutput connector OperationFront panel buttons and LEDs Operation, cont’d Front Panel Controls and IndicatorsTroubleshooting Front Panel OperationsOperation, cont’d Remote ControlFour Reference Information Remote Control Contact Closure/Tally Out ControlAAppendix a Contact closureSpecifications, Part Numbers, and Accessories SpecificationsAccessories Specifications, Part Numbers, Accessories, cont’dSwitchers Included Parts
Related manuals
Manual 2 pages 62.39 Kb