Extron electronic RGB 404, RGB 402, RGB 406, RGB 408, RGB 400 Series user manual Specifications

Page 19

Specifications

These specifications apply to all models unless otherwise noted.

Video input

Number/type

1 analog RGBHV, RGBS, RGsB

Connectors

1 9-pin male D connector for MBC/LBC

 

cable or buffer

Nominal level(s)

Analog — 0.3V to 1.45V p-p

Impedance

75 ohms or HI Z, switchable (set to

 

75 ohms if no local monitor is connected)

Horizontal frequency

15 kHz to 150 kHz (optimum 15 kHz to 62

 

kHz)

Vertical frequency

30 Hz to 170 Hz

Return loss

-30dB @ 5 MHz

Video throughput

Gain

Unity (0.7V), 15% with 3dB peaking

 

(0.8V), 30% with 6dB peaking (0.9V)

Bandwidth

300 MHz (-3dB)

Video output

Number/type/format

1 analog RGBHV, RGBS, RGsB

Connectors

6 BNC female

Nominal level

Analog 0.7V p-p, 0.8V p-p, or 0.9V p-p

 

(internal jumper-selectable) w/peaking

Impedance

75 ohms

Return loss

-30dB @ 5 MHz

Sync

Input type

Autodetect RGBHV, RGBS, RGsB

 

(accepts RGsB but does not strip from

 

video)

Output type

RGBHV at all times

 

RGBS at all times

 

RGsB only when input is RGsB

Input level

2.0V to 5.5V p-p with +0.2VDC offset

 

max.

Output level

4.0V to 5.0V p-p

Input impedance

10 kohms

Output impedance

75 ohms

Max propagation delay

50 nS

Max rise/fall time

2.5 nS

Polarity

Positive or negative

Audio input — RGB 402

Number/type

1 stereo, unbalanced (pass-through)

Connectors

2 RCA female jacks

Audio input — RGB 404

Number/type

2 stereo, unbalanced; 1.0Vrms (+4dBu),

 

20 Hz to 20 kHz

Connectors

Ch. 1

2 RCA female jacks

 

Ch. 2

3.5 mm stereo female jack

 

 

(2 channel), unbalanced;

 

 

tip (L), ring (R),

 

 

sleeve (ground)

Impedance

10 kohms, DC coupled

Minimum level

100mV

 

Maximum level

+8.5dBu

 

Audio input — RGB 406 and RGB 408

Number/type

1 stereo, unbalanced; 1.0Vrms (+4dBu),

 

20 Hz to 20 kHz

Connectors

3.5 mm stereo female jack (2 channel),

 

unbalanced;

 

tip (L), ring (R), sleeve (ground)

Impedance

10 kohms, DC coupled

Minimum level

100mV

Maximum level

+8.5dBu

Audio throughput — RGB 404 (channels 1 and 2), RGB 406 and RGB 408

Gain

Unbalanced 0dB, balanced +6dB

Response

±0.5dB @ 20 Hz to 20 kHz

THD + Noise

0.03% @1 kHz, 0.3% @ 20 kHz at rated

 

maximum output drive

S/N

>90dB, output 14dBu, balanced

Stereo channel separation

>95dB @ 1 kHz to 20 kHz

Audio output — RGB 402

Number/type

1 stereo, unbalanced

Connectors

1 pair solder cups

A-2

RGB 400 Series Specifications

RGB 400 Series Specifications

A-3

Image 19
Contents Mountable Interfaces User’s ManualExtron’s Warranty PrecautionsFCC Class a Notice Table of Contents Introduction Table of Contents, cont’dAppendix D Accessories and Part Numbers OneRGB 400 Series Installation and OperationTwo IntroductionDetermining installation location Installation and OperationInstallation Overview Installation and Operation InstructionsPreparing the installation site and installing the wall box Installation and Operation, cont’dExtron Front and rear panel circuit board featuresNetwork pass-through RJ-45 connector RGB 402 front and rear featuresYellow Black RGB 404 front and rear featuresExtron RGB 408 front and rear featuresJumpers Setting DIP switches and jumpersDIP switches Attaching adapter plates RGBConnecting shields Cabling RCA connectorsAttaching cables to pass-through connectors Cabling S-video connectorsElectrical tape or heat shrink, and secured Connecting audio cables RGBPre-installation testing/troubleshooting If the image does not display correctly Mounting the interface to the wall boxIf no image or sound results from pass-through connections RGB Application diagramsAAppendix a SpecificationsSpecifications General Specifications, cont’dAudio output RGB 404 channels 1 Audio output RGB 406 and RGBTemplates AppendixBBRGB 400 and RGB 406 Cut-out Template TemplatesRGB 402 and RGB 404 Cut-out Template AppendixCC DimensionsRGB 408 Cut-out Template RGB 400 Panel Dimensions DimensionsRGB 402 Panel Dimensions RGB 406 Panel Dimensions RGB 404 Panel Dimensions Dimensions, cont’dRGB 408 Panel DimensionsDAppendix D Accessories and Part NumbersCables Part Numbers and AccessoriesAccessories and Connectors Interfaces and Included PartsOptional Adapter Plates Part Numbers and Accessories, cont’dMulti Type Connector Architectural Adapter Plates RGB 400 Series Part Numbers and Accessories

RGB 408, RGB 404, RGB 402, RGB 400 Series, RGB 406 specifications

The Extron Electronic RGB 400 Series is a powerful line of RGBHV distribution amplifiers designed to meet the demands of professional audio-visual installations. This series encompasses several models, including the RGB 406, RGB 402, RGB 404, and RGB 408, each tailored to specific applications while maintaining the high-quality performance expected from Extron products.

One of the standout features of the RGB 400 Series is its exceptional video quality. These distribution amplifiers support resolutions up to 1600x1200 and 1080p, ensuring that users can deliver crystal-clear images without degradation over extended distances. The units provide precise signal amplification and distribution, making them ideal for large venues such as auditoriums, conference rooms, and classrooms.

The RGB 406 model, for instance, is designed to handle up to six inputs and provides a robust output for distribution, making it suitable for installations that require multiple sources. The RGB 402, with its unique two input capacity, offers a more compact solution while still delivering outstanding performance. For those needing four inputs, the RGB 404 serves as an efficient choice, ensuring that users have seamless switching capabilities.

Meanwhile, the RGB 408 supports an extensive eight input capacity, catering to complex AV environments where multiple source devices are in use. The series also incorporates features such as automatic gain control and DC coupling, which enhance the overall signal integrity and minimize distortion.

Each model comes equipped with Extron's advanced technologies, including signal isolation and ground loop prevention, reducing the chances of interference and ensuring a reliable signal path. With user-friendly design considerations, the RGB 400 Series incorporates easy-to-use controls and LED indicators for simple operation and monitoring.

Additionally, the series supports a variety of connector types, providing installation versatility and compatibility with various equipment. The inclusion of robust metal enclosures ensures durability, while also allowing for rack mounting to maximize space efficiency in equipment rooms.

In conclusion, the Extron Electronic RGB 400 Series, featuring the RGB 406, RGB 402, RGB 404, and RGB 408 models, is an excellent choice for professionals seeking high-performance RGBHV distribution amplifiers. With their high-quality video output, versatile input options, advanced technologies, and reliability, these units cater to a broad range of AV installation needs, making them a staple in the professional AV industry.