Extron electronic QGE 100 setup guide Rear Panel Features and Connections, Installation Steps

Page 1

QGE 100 • Setup Guide

The QGE 100 Quantum Graphics Encoder encodes an RGB or DVI signal from a source computer or similar graphical device and streams it to a Quantum® Elite Videowall Processor, computer, or other viewing device over an IP network. The viewing device can then decode the image data and reproduce the original source image, displaying it at its original or scaled resolution. The QGE is connected between a source computer and its monitor, keyboard, and mouse without affecting the performance of the computer. From these connections it obtains data about changes in the display content, along with keyboard and mouse actions.

NOTE: For full installation, configuration, and operation details, see the QGE 100 User Guide at www.extron.com.

Rear Panel Features and Connections

1

2

3

4

5

Reserved for

 

 

 

 

 

 

Future Use

A Power connector

 

 

 

 

 

 

 

 

PERIPH

PC

COM 1

COM 2

B Ethernet port

 

 

C Peripheral mouse connector

 

 

 

 

 

 

 

 

 

 

 

 

D PC mouse connector

12V DC IN

 

 

 

OUT

IN

E COM1 serial port

REG

 

 

 

 

 

F DVI-I In monitor port

1.5A MAX

 

 

 

 

 

 

 

 

 

 

 

Refer all servicing to

 

 

 

DVI-I

DVI-I

G DVI-I Out loop-through connector

qualified service personnel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

H PC keyboard connector

 

 

9

8

7

6

I Peripheral keyboard connector

Installation Steps

1.Disconnect power from the QGE and power off all other equipment in the system.

2.Connect the QGE to the source computer:

NOTE: If you do not intend to use keyboard and mouse control of the source computer through the QGE 100, omit the first four bullets (connecting the QGE between the source computer and its keyboard and mouse).

zz

zz

zz

zz

zz

zz

Connect the PS/2 mouse of the source computer to the QGE Periph mouse port (C in the diagram above). Connect the PS/2 keyboard of the source computer to the QGE Periph keyboard port (I).

Connect the QGE mouse PC port (D) to the PS/2 mouse connector of the source computer. Connect the QGE keyboard PC port (H) to the PS/2 keyboard connector of the source computer. Connect the DVI-I In (F) monitor port of the QGE to the monitor port of the source computer. Connect the monitor of the source computer to the DVI-I Out loop-through connector (G) of the QGE.

3.Connect the QGE to the network. Connect the QGE Ethernet port to the network of your viewing device.

4.Connect power to the QGE 100 (see “Connecting Power to the QGE 100,” below).

NOTE: Always power up the QGE 100 before the source computer; otherwise, the QGE does not correctly detect the mouse, keyboard, and monitor.

5.Power on the source computer.

CAUTION: Always power on the source computer and QGE 100 after making all connections between them.

Connecting Power to the QGE 100

1.Plug the mini DIN connector of the provided 12 VDC power supply into the rear panel connector labeled “12V DC.”

2.Connect the provided power cord between the IEC connector of the power supply and an AC outlet. (The QGE 100 power supply is double-insulated and does not require an earth to ground connection.)

1

Image 1
Contents Installation Steps Rear Panel Features and ConnectionsConnecting Power to the QGE Power on the source computerConfiguring the QGE Front Panel FeaturesLAN LED amber Status LED amberPage Using the QGE 100 Viewer Software
Related manuals
Manual 62 pages 61.57 Kb

QGE 100 specifications

The Extron QGE 100 is a high-performance network switch engineered specifically for AV system integration. With its advanced capabilities, this device plays a crucial role in managing AV data traffic, ensuring reliable performance and efficiency in various settings such as corporate environments, educational institutions, and healthcare facilities.

One of the key features of the QGE 100 is its support for Power over Ethernet (PoE). This allows the switch to deliver both data and power to connected devices over a single Ethernet cable, simplifying installations and reducing the need for additional power sources. This is particularly beneficial for devices like IP cameras, wireless access points, and AV devices in scenarios where accessibility to power outlets may be limited.

The QGE 100 also provides a robust Layer 2 switching functionality, which is essential for managing data flow within the network. Its capability to handle multiple VLANs ensures that AV traffic can be segregated effectively, thus improving network performance and security. The switch features IGMP Snooping, a protocol that optimizes multicast traffic management, ensuring that video streams reach the intended recipients without unnecessary bandwidth consumption.

In terms of connectivity, the Extron QGE 100 is equipped with multiple Gigabit Ethernet ports, facilitating high-speed data transmission for AV content. The switch's user-friendly management interface allows for straightforward configuration, monitoring, and troubleshooting, streamlining operations across AV environments. Additionally, it supports link aggregation, enhancing bandwidth and redundancy when connecting multiple devices.

The QGE 100 is also designed with reliability in mind, featuring a fanless operation that minimizes noise and ensures a long lifespan. Its compact form factor allows for easy rack mounting in equipment racks, maintaining a clean and organized setup.

Another vital characteristic of the QGE 100 is its compatibility with Extron's comprehensive suite of AV control and management products. This integration capability provides users with a cohesive solution for managing their AV systems, further enhancing the overall user experience.

In conclusion, the Extron QGE 100 network switch is an essential tool for any AV system requiring efficient connectivity, power delivery, and data management. Its sophisticated features and technologies make it a valuable asset in modern AV installations, ensuring robust performance and ease of use.