Extron electronic specifications SMB 203 L and SMB 205 L Installation Guide, Models

Page 1
Mark pilot holes
for keyhole slot (1/16”) or mounting hole (1/16”).

Number of accessible AAP openings

SMB 203 L

1 double-space (back), 1 double-space (bottom)

SMB 205 L

2 double-space (back), 2 double-space (bottom)

Included blank AAP plates

 

SMB 203 L

1 double-space

SMB 205 L

2 double-space

Furniture mounting holes

4 (2 are slotted)

Cable management lance punches

SMB 203 L

2

SMB 205 L

3

Front angle

36° from vertical, 54° from horizontal

Product weight

 

SMB 203 L

1.1 lbs (0.5 kg)

SMB 205 L

1.6 lbs (0.7 kg)

Shipping weight

2 lbs (1 kg)

Vibration

ISTA 1A in carton (International Safe Transit

 

Association)

Warranty

3 years parts and labor

NSpecifications are subject to change without notice.

Models

Models

Part number

 

 

SMB 203 L (black, white)

60-942-02, -03

SMB 205 L (black, white)

60-943-02, -03

 

 

Included Parts

These items are included in each order of the SMB 203 L or SMB 205 L.

SMB 203 L and SMB 205 L Installation Guide

NFor illustration purposes, the following steps use the SMB 205 L as an example, but the instructions apply to the SMB 203 L as well.

1.For tabletop placement, the four included adhesive rubber feet may be applied to the bottom corners of the mounting base.

2.For angled installations, securely mount the SMB using the two keyhole slots and/or mounting holes in the mounting base.

Mount the SMB using the keyhole slots and/or the mounting holes:

Position the SMB at the desired location.

• Mark the holes on the surface to be drilled. See the illustration at right.

3. Drill 1/16" pilot holes for

the keyhole slots or the mounting holes. For the

keyhole slots, insert screws into the pilot holes, but

do not tighten them down until the SMB is slid into position. For the mounting holes, position the SMB over the holes and secure the SMB into position.

4.Cables may access the SMB through the AAP openings in the rear panel and the bottom mounting base.

If cables are to access the SMB through the rear panel, use the rear panel AAP openings, as shown here. AAP modules are sold separately.

www.extron.com

Included parts

 

 

 

 

Replacement

 

 

 

 

 

 

 

 

 

part number

 

 

 

 

 

 

 

 

 

Adhesive rubber feet (4)

 

 

 

 

 

 

 

Blank double-spaced AAP (1), SMB 203 L only

70-090-12 (black)

 

 

 

or

 

 

 

 

 

 

 

 

 

70-090-22 (white)

 

Blank double-spaced AAP (2), SMB 205 L only

70-090-12 (black)

 

 

 

or

 

 

 

 

 

 

 

 

 

70-090-22 (white)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

68-1497-01 Rev. A

 

 

 

 

 

 

 

 

 

11 07

Extron Electronics, USA

 

Extron Electronics, Europe

 

Extron Electronics, Asia

 

Extron Electronics, Japan

 

 

 

1230 South Lewis Street

 

Beeldschermweg 6C

 

135 Joo Seng Rd. #04-01

 

Kyodo Building, 16 Ichibancho

Anaheim, CA

92805

 

3821 AH Amersfoort, The Netherlands

 

PM Industrial Bldg., Singapore 368363

 

Chiyoda-ku, Tokyo 102-0082

800.633.9876

714.491.1500

 

+800.3987.6673

+31.33.453.4040

 

+800.7339.8766

+65.6383.4400

 

Japan

FAX 714.491.1517

 

FAX +31.33.453.4050

 

FAX +65.6383.4664

 

+81.3.3511.7655 FAX +81.3.3511.7656

Rear

Mounting

Nuts

 

AAPs (not included)

Optional Split AAP

4

SMB 203 L and SMB 205 L Installation Guide

SMB 203 L and SMB 205 L Installation Guide



Image 1
Contents Models SMB 203 L and SMB 205 L Installation GuideIncluded Parts General Specifications