•Ensure that the transmitter is firmly plugged into the source device and the receiver is firmly plugged into the output device.
•Try resetting the system by unplugging and reconnecting the DVI connectors or the power jacks.
•Try rebooting the computer.
Screen is distorted or displays noise
•Ensure that the cable length does not exceed 1,640' (500 m).
•Ensure that the cables are high quality multimode cable and are terminated with securely fitting plugs.
•Ensure that the graphic resolution is correctly set (see “Setup and Operation”).
•View the “Display Properties” of the source device to check the output resolution. The resolution and refresh rate must match the capabilities of the display device and must not exceed 1920 x 1200 at 60 Hz.
•Try resetting the system by unplugging and reconnecting the DVI connectors or the power jacks.
DVI 104 Tx/Rx • User’s Guide | 9 |