Using the ZipClip, Rack Mounting | Extron electronic PS 1508

Extron External Power Supply Installation Guide

About PS 910, PS 1210, PS 1508 Power Supplies

Model	Part	Power Output	Termination
	Number
PS 910C	70-774-01	9 watts, 9 VDC, 1 A	Captive screw
PS 910P	70-777-01	9 watts, 9 VDC, 1 A	DC plug

PS 1210C	70-775-01	12 watts, 12 VDC, 1 A	Captive screw

PS 1210P	70-778-01	12 watts, 12 VDC, 1 A	DC plug

PS 1508C	70-776-01	12 watts, 15 VDC, 0.8 A	Captive screw
ZipClip™ 100	101-002-01	—	—

Connector pin assignments

PS 910C, PS 1210C, PS 1508C	PS 910P, PS 1210P
Tie Wrap
Smooth	Tip (+)

Power Supply
Output Cord
Ridged	Captive Screw	Sleeve (-)
Ridged	Connector	Sleeve (-)
	Connector

Features

Notches for Securing

Tie Wrap

Power

LED

ZipClip Mounting Slots

Using the ZipClip 100

Attaching/removing the clip and power supply

To attach the power supply to the ZipClip 100 mounting clip:

1. Insert the bottom of the power supply down into the clip, starting with one end.

2. Pivot the other end down and press until the clip snaps into place.

To remove the power supply from the ZipClip:		2
1.	Press the ZipClip’s tab.	2
1.	Press the ZipClip’s tab.
2.	Pivot the power supply
	and lift it out of the
	ZipClip.

Using tie wraps for cable strain relief

1. Attach the power supply to the ZipClip 100 mounting clip as described previously.

2. Fastening the power output cord to the ZipClip base.

a. Insert tie wraps along the notches on the side of the power

supply and through the ZipClip’s tie wrap anchor points,

then around the cord.

Rack Mounting

Mounting to a rack shelf

These power supplies are one eighth rack wide. Up to eight power supplies can be mounted side by side on a rack shelf.

1. Align the threaded holes in the bottom of the power supply with the holes in an Extron rack shelf and fasten the supply to the shelf with two screws as shown below.

	Rack Mounted	PRELIMINARY
	Rack Mounted
2
	1
	(2) 4-40 x 3/16"
	Screws
	VersaTools® Rack Shelf
	2. Bolt the rack shelf to the rack.

Mounting to rack rails using a ZipClip

1. Fasten the ZipClip 100 mounting clip to a rack beam using two rack screws, as shown below.

2. Insert the bottom of the power supply down into the clip, starting with one

end.

3. Pivot the

	other end	Side of Rack
	toward	Side of Rack
	toward
	the clip
	and press
	until
	the clip
	snaps
	into
	place.

Back of Rack

7 6

5 4

Inside a Rack

b. Connect pull the tie wrap until secure. Do not over tighten.

Cable

Strain

Relief

Pole or Table Leg Mounting

1. Wrap a tie wrap around the projector mount pole or table leg and the power supply at one of the tie wrap notches, and fasten the tie wrap together to secure the power supply to the pole or table leg.

2. Repeat step 1 at the other tie wrap notch.

Tie Wrap to Pole

68-1575-01 Rev. A

05 08

Extron PS 910, PS 1210, PS 1508 Series Installation Guide

PS 1210, PS 1508, PS 910 specifications

Extron Electronics is renowned for its high-quality audiovisual solutions, and the PS series of power supplies is no exception. The PS 910, PS 1508, PS 1210, PS 1508C, and PS 1210P are specifically designed to provide reliable, robust, and efficient power for a range of A/V components, ensuring optimal performance and longevity.

The PS 910 is a versatile power supply that is known for its compact design and high performance. It delivers a comprehensive output of 9 watts with a regulated voltage, which is essential for sensitive electronic devices. With its sleek and lightweight design, the PS 910 is easy to mount in constrained spaces without compromising on power quality.

The PS 1508 stands out due to its high-efficiency output and unique eight-port distribution system. This power supply features multiple outputs, allowing it to power several devices simultaneously. The built-in surge protection ensures that connected devices are safeguarded against spikes and fluctuations in power, a crucial characteristic for the longevity of A/V equipment.

The PS 1210 offers a balanced approach with a power output of 12 watts. This model is especially beneficial for applications that require consistent and reliable power, such as professional A/V installations. The PS 1210 also incorporates Extron's attention to detail with features like LED indicators that provide status updates, making it user-friendly and efficient in monitoring power supply status.

For environments requiring enhanced protection and versatility, the PS 1508C is ideal. In addition to eight output ports, this model incorporates a metal enclosure, providing additional durability for more demanding settings. It ensures that AV components are not only powered efficiently but also protected from physical damage.

The PS 1210P is designed for professional use, delivering a consistent 12 watts of power with high reliability. Its features include a universal input voltage range, making it adaptable to different power settings worldwide. This makes it an ideal choice for global A/V projects where power configurations may vary.

Overall, the Extron PS series provides a robust solution for powering A/V equipment. With their efficient power distribution, protective features, and user-friendly designs, these power supplies fulfill the needs of various installation environments while promoting the longevity of connected devices. Whether used in commercial installations or educational settings, the PS series stands as a testament to Extron's commitment to quality and innovation in the field of audiovisual technology.

Extron External Power Supply Installation Guide

About PS 910, PS 1210, PS 1508 Power Supplies

Model

Part

Power Output

Termination

Number