Gigabyte GA-MA770T-UD3P user manual Create Arrays Manually, Drives Assignments

Create Arrays Manually

To create a new array, press <2> to enter the Define LD window (Figure 4). The Define LD selection from the Main Menu allows users to begin the process of manually defining the drive elements and RAID levels for one or multiple disk arrays attached to the AMD SB710 controller.

Option ROM Utility (c) 2008 Advanced Micro Devices, Inc.

			[ Define LD Menu ]
LD	No	RAID Mode		Total Drv	Capacity (GB)	Status
LD	1		----	----	-----	----
LD	2		----	----	-----	----
LD	3		----	----	-----	----
LD	4		----	----	-----	----
LD	5		----	----	-----	----
LD	6		----	----	-----	----
LD	7		----	----	-----	----
LD	8		----	----	-----	----
LD	9		----	----	-----	----
LD	10		----	----	-----	----
			[	Keys Available	]
[] Up	[] Down		[ESC] Exit	[Enter] Select

Figure 4

In Figure 4, use the up or down arrow key to move to a logical disk set and press <Enter> to enter the RAID configuration menu (Figure 5).

Option ROM Utility (c) 2008 Advanced Micro Devices, Inc.

			[ Define LD Menu ]
LD	No	RAID Mode	Total Drv
LD	1	RAID 0	0
Stripe Block:		64 KB	Fast Init:	ON
Gigabyte Boundary: ON			Cache Mode:	WriteThru

		[ Drives Assignments ]
	Channel:ID	Drive Model	Capabilities	Capacity (GB)		Assignment
	1:Mas	WDC WD800JD-22LSA0	SATA 3G		79.89	N
	2:Mas	WDC WD800JD-22LSA0	SATA 3G		80.02	N
		[ Keys Available ]
[] Up	[] Down	[ESC] Exit [Space] Change [Ctrl-Y] Save			[PgUp/Dn] Page Change

Figure 5

GA-MA770T-UD3P Motherboard - 76 -