4.Locate the AGP slot. If necessary, remove the metal cover from this slot; then align your Graphics card with the AGP slot, and press it in firmly until the card is fully eated.
AP64D/A P64D -H
Graphics card
AGP Slot
5.Replace the screw to fasten the card in place, and replace the computer cover.
AP64D/A P64D
G raphics card
6.Plug the display cable into your card; then turn on the computer and monitor. If your Graphics card came with a DVI connector, you can connect a flat panel display to the appropriate connector, as shown below...
To TV or VCR
To Fla t Panel Di splay | To VGA MON IT OR |
|
You are now ready to proceed with the installation of the Graphics card driver. For detailed instructions, select your operating system from the list below:
8