&Time
The times format in <hour> <minute> <second>. The time is calculated base on the
&IDE Primary Master, Slave / IDE Secondary Master, Slave
The category identifies the types of hard disk from drive C to F that has been installed in the computer. There are two types: auto type, and manual type. Manual type is
Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category.
If you select User Type, related information will be asked to enter to the following items. Enter the information directly from the keyboard and press <Enter>. Such information should be provided in the documentation form your hard disk vendor or the system manufacturer.
CYLS. | Number of cylinders |
HEADS | Number of heads |
PRECOMP | Write precomp |
LANDZONE | Landing zone |
SECTORSNumber of sectors
If a hard disk has not been installed select NONE and press <Enter>.
&Drive A / Drive B
The category identifies the types of floppy disk drive A or drive B that has been installed in the computer.
None |
| No floppy drive installed |
| ||
360K, 5.25 in. | 5.25 | inch | |||
1.2M, 5.25 | in. | 5.25 | inch | ||
|
| (3.5 inch when 3 Mode is Enabled). |
| ||
720K, 3.5 in. | 3.5 inch | ||||
1.44M, 3.5 | in. | 3.5 | inch | byte capacity. | |
2.88M, 3.5 | in. | 3.5 | inch | byte capacity. |
English
- 31 - | BIOS Setup |