STEP 6: Load BIOS defaults.
Normally the system redetects all devices after BIOS has been upgraded. Therefore, we highly recommend reloading the BIOS defaults after BIOS has been upgraded. This important step resets everything after the flash.
(1)Take out the floppy diskette from floppy drive, and then restart the system. The boot up screen will indicate your motherboard model and current BIOS version.
American Release:09/16/99
Megatrends AMIBIOS (C) 1999 American Megatrend
7VTX F4
Check System Health OK
262144KB
Wait...
Press F1 to enter Dual BIOS Utility. Press ESC to quit
Press any key to contiune
( C ) American Megatrends Inc.,
(2)Don't forget to press <DEL> key to enter BIOS setup again when system is boot up. Use the arrows to highlight the item "LOAD SETUP DEFAULTS" then press "Enter". System will ask "Load Setup Defaults (Y/N)?" Press "Y" and "Enter" keys to confirm.
|
| AMIBIOS SIMPLE SETUP UTILITY - VERSION 1.24b |
| |||
|
| (C) 2001 American Megatrends, Inc. All Rights Reserved |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| STANDARD CMOS SETUP |
| INTEGRATED PERIPHERALS |
| ||
| BIOS FEATURES SETUP |
| HARDWARE MONITOR & MISC SETUP |
| ||
| CHIPSET FEATURES SETUP |
| SUPERVISOR PASSWORD |
| ||
| POWER MANAGEMENT SETUP |
| USER PASSWORD |
|
| |
|
|
|
| |||
|
| Load Setup Defaults? (Y/N)?N |
|
| ||
| PNP / PCI CONFIGURATION |
| IDE HDD AUTO DETECTION |
|
| |
|
|
|
|
|
|
|
| LOAD BIOS DEFAULTS |
| SAVE & EXIT SETUP |
|
| |
| LOAD SETUP DEFAULTS |
| EXIT WITHOUT SAVING |
| ||
|
|
|
|
|
|
|
ESC: Quit | : Select Item | (Shift)F2 : Change Color | F5: Old Values | |
F6: Load BIOS Defaults | F7: Load Setup Defaults | F10:Save & Exit | ||
Load Setup Defaults
English
- 67 - | Technical Reference |