Gigabyte GN-A16B manual TCP/IP Settings LAN Interface Setup, IP Address & Subnet Mask

Page 39

GN-A16B Wireless Access Point User Guide

TCP/IP Settings - LAN Interface Setup

Each setup item of the local area network is the default settings, and is not necessary to make change to it for nomal operation.

1IP Address & Subnet Mask

The values are the Access Point’s IP Address and Subnet Mask. The default values are 192.168.1.1 for the IP Address and 255.255.255.0 for the Subnet Mask. You may need to assign a different Static IP address to each Access Point. But all devices on the network must have the same subnet mask to communicate on the network.

1Gateway

Enter the IP address of the default route. The default gateway is 192.168.1.254

1DHCP Mode

There are four settings under this option you can choose: “Disabled”, “Client Enabled”, “Server Enabled” and “Auto”. Disabled is the default setting.

If you want to get IP address from the DHCP server automatically on your network, you will select “Client Enabled”. Or you want to use the Access Point as a DHCP server to automatically assign dynamic IP address on the network, you will select “Server Enabled”

39

Image 39

Contents Wireless Access Point FCC Radiation Exposure Statement Federal Communication Commission Interference StatementContents Features IntroductionOverview Rear Panel Package ContentsFront Panel LEDs System Requirements InstallationInternet Configuration Requirements Hareware RequirementsConnect to Access Point Hareware InstallationMethod 1 Static IP address IllustrationObtain IP Address Automatically Dhcp Server Enabled Method 2 Numerous Access Points settingInstalling the Access Point Manager Access Point ManagerType the User Information then click Next Click Next Click Finishto complete setup Using the Access Point Manager Menu bar Tools Load DefaultPassword Tree structureSystem Reboot Toor bar Find Access PointSave AP Configuration Load AP ConfigurationSystem Device InformationChange Community String GN-A16B Wireless Access Point User Guide Gateway IP ConfigIP Address Subnet MaskDhcp Mode Dhcp Client Range & DNS802.1d Spanning Tree Preamble Type Wireless OperationRegion Channel IDFragment Threshold Auto RateHidden Essid RTS ThresholdBeacon Interval Encryption Authentication TypeHex & Ascii WEP Key Mode64 40 Bits or 128 104 bits Automatic GenerationEnable MAC Filter Disable MAC FilterAdvanced Associated List Set Community String Change AP Manager PasswordUpgrade Firmware Manager Utility \ Gigabyte AP UpgradeRun Tftp Program Uninstall AP Utility GN-A16B Wireless Access Point User Guide Status Web-Based Configuration UtilityAssociated Clients Wireless Basic settingsAlias Name Channel NumberWireless Advanced Settings Broadcast Ssid Data RateAutomatic Generation Wireless Security SetupDelete the MAC Address Wireless Access ControlKey Format Add a MAC AddressIP Address & Subnet Mask TCP/IP Settings LAN Interface SetupStatistics Save/ Reload Settings Community Can the router act as Dhcp server? TroubleshootingWhat is the IEEE802.11b standard? Unable to connect to the Internet?What is WEP? Auto-negotiate Access PointAppendix a Glossary Auto-MDI/MDIXIP Address Dynamic IP AddressFirewall GatewaySubnet Mask SsidPhysical Interface Appendix B Specification802.11b System Specification Feature DescriptionAppendix C Configuration of the PCs Setting under WindowsSelect Control Panel Double-click the Network and Dial-up Connections icon Internet Protocol TCP/IPitem Settings under Windows 95/98/Me Your network LAN cardand click Properties button Your computer anyway Settings under Windows XP Internet Protocol TCP/IPitem Computer e.g, IP address is 192.168.1.2 and Subnet Mask is Year Warranty Limited WarrantyGN-A16B Wireless Access Point User Guide GN-A16B Wireless Access Point User Guide GN-A16B Wireless Access Point User Guide GN-A16B Wireless Access Point User Guide GN-A16B Wireless Access Point User Guide 25A08-0A16B-F00