English
Serial ATA Function
RAID | Select onboard Serial ATA chip function as RAID. (Default value) |
BASE | Select onboard Serial ATA chip function as base. |
Onboard Giga-RAID
Enabled | Enable onboard GigaRAID chip function. (Default value) |
Disabled | Disable onboard GigaRAID chip function. |
Onboard 1394
Enabled | Enable onboard IEEE1394 function. (Default value) |
Disabled | Disable onboard IEEE1394 function. |
Onboard LAN Control
Enabled | Enable onboard LAN chip function. (Default value) |
Disabled | Disable onboard LAN chip function. |
Onboard LAN Boot ROM
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Enabled | Enable this function. |
Disabled | Disable this function. (Default value) |
Onboard Serial Port 1
Auto | BIOS will automatically setup the port 1 address. |
3F8/IRQ4 | Enable onboard Serial port 1 and address is 3F8. (Default value) |
2F8/IRQ3 | Enable onboard Serial port 1 and address is 2F8. |
3E8/IRQ4 | Enable onboard Serial port 1 and address is 3E8. |
2E8/IRQ3 | Enable onboard Serial port 1 and address is 2E8. |
Disabled | Disable onboard Serial port 1. |
Onboard Serial Port 2
Auto | BIOS will automatically setup the port 2 address. |
3F8/IRQ4 | Enable onboard Serial port 2 and address is 3F8. |
2F8/IRQ3 | Enable onboard Serial port 2 and address is 2F8. (Default value) |
3E8/IRQ4 | Enable onboard Serial port 2 and address is 3E8. |
2E8/IRQ3 | Enable onboard Serial port 2 and address is 2E8. |
Disabled | Disable onboard Serial port 2. |
Onboard Parallel Port
378/IRQ7 | Enable onboard LPT port and address is 378/IRQ7. (Default value) |
278/IRQ5 | Enable onboard LPT port and address is 278/IRQ5. |
Disabled | Disable onboard LPT port. |
3BC/IRQ7 | Enable onboard LPT port and address is 3BC/IRQ7. |
Parallel Port Mode
SPP | Using Parallel port as Standard Parallel Port. (Default value) |
EPP | Using Parallel port as Enhanced Parallel Port. |
ECP | Using Parallel port as Extended Capabilities Port. |
ECP+EPP | Using Parallel port as ECP & EPP mode. |
ECP Mode Use DMA
3 | Set ECP Mode Use DMA to 3. (Default value) |
1 | Set ECP Mode Use DMA to 1. |
Game Port Address
201 | Set Game Port Address to 201. (Default value) |
209 | Set Game Port Address to 209. |
Disabled | Disable this function. |
- 44 - |