Gigabyte GA-K8NS Pro user manual Troubleshooting

English

Troubleshooting

If you encounter any trouble during boot up, please follow the troubleshooting procedures.

START

Turn off the power and unplug the AC power cable, then remove all of the add-on cards and cables from motherboard.

Please make sure motherboard & chassis are not short ?		Yes	Please isolate
			the short pin.
No
	Failure has been excluded.
Please make sure all jumper settings (such as CPU system bus		No	Make sure the
			jumper setting
speed, frequency ratio, voltage and etc) are set properly.			are correct.
Yes
	Failure has been excluded.
			P l u g t h e C P U
		No	cooling fan power
Check if the CPU cooling fan attached to CPU properly. ls			in the CPU fan
			connector. Plug in
CPU cooling fan power connected to CPU_FAN			t h e A C p o w e r
properly?			connector.
Yes
	Failure has been excluded.
		No	Insert and push
Check if the memory install properly into the DIMM slot.			t h e m e m o r y
			module vertically
			into the DIMM slot.
Yes
	Failure has been excluded.

Insert the VGA card. Then plug in ATX power cable and turn on the system.

A

GA-K8NS Pro Motherboard - 86 -