Gigabyte GN-FE605(M) manual Install Snmp service in Windows NT4

GN-FE605(M) PCI Adapter User’s Guide

6.In the System Setting Change dialog box, click OK to restart the system and finish the installation.

Note:

1. SNMP starts automatically after system restart.

Install SNMP service in Windows NT4

In Microsoft windows NT4, SNMP service installation procedure is listed as the following:

1.Click Start, point to Settings, click Control Panel, double-click Network.

2.In the Network dialog box, click Services tab.

3.In the Services tab, click Add.

4.In the Select Network Service dialog box, select SNMP Service from the Network Service list, and then click OK.

5.In the Windows NT Setup dialog box, type the Windows NT Source Path, and then click Continue.

6.After Windows NT Setup finish file-copy, in the Windows SNMP Properties dialog box click OK.

7.In the Network dialog box, SNMP Service will add to the Network Services list control in the Services tab, and then click Close.

8.In the System Setting Change dialog box, click OK to restart the system and finish the installation.

Note:

1.You must be logged on as an administrator or a member of the Administrators group in order to complete this procedure. If your computer is connected to a network, network policy settings might also prevent you from completing this procedure.

2.SNMP starts automatically after installation.

Start or stop SNMP service in Windows 2000/XP

1.Click Start, point to Settings, and click Control Panel. Double-click Administrative Tools and then double-click Computer Management.

38