Gigabyte GN-FE605(M) manual Installation, Hardware Requirements, Windows Platform Supports

GN-FE605(M) PCI Adapter User’s Guide

Installation

Hardware Requirements

As the minimal configuration for all Windows operating systems, you must have: A PC with a 486 processor or higher and speed of at least 33 MHz, a minimum of 16 MB memory support.

Windows Platform Supports

Fundamental Functions:

Fundamental Functions are supported if you’re using Windows 95/98/ME, Windows NT 4.0, Windows 2000, and Windows XP.

Advanced Management Functions:

Advanced Management Functions are only supported with Windows 2000, and Windows XP.

Installation of NIC Control Set

1.Insert the Gigabyte CD into the CD-ROM drive. The CD autorun program starts. Click FE605(M) \ Install NIC ControlSet.

2.The Installation Program will guide you through the subsequent steps. Just follow the instructions as they appear on the screen. You then have the option of choosing between different setup types. After completing the installation, you can start NIC Control Set immediately.

Uninstallation

Select NIC Control Set from the Start Menu under Settings/Control

Panel/Add-Remove Programs, and select Remove. This operation will delete all NIC Control Set program files and will remove NIC Control Set from the Start Menu.

52