Cisco Systems C7200 manual Online Insertion and Removal OIR, Safety Guidelines, Safety Warnings

Page 27

Chapter 2 Preparing for Installation

Online Insertion and Removal (OIR)

The VSA module does not support Online Insertion and Removal (OIR). See “Enabling/Disabling the VSA” section on page 1-6for details.

Per packet count details for crypto map ACL are not displayed when the show access-listcommand is entered.

Use other counters, such as the output from the show crypto ipsec sa and show crypto engine accelerator statistics 0 commands, to determine if the VSA is processing the packets.

An anti-replay window size of 1024 is not supported.

Online Insertion and Removal (OIR)

The VSA plugs into the I/O controller slot of the Cisco 7200VXR series chassis. The VSA crypto card does not support OIR. The VSA boots up only during system initialization. The VSA will not work if it is inserted after the system is up and running. The VSA can be shut down by a disabling CLI command (see “Enabling/Disabling the VSA” section on page 1-6). The VSA is ready for removal after the disabling CLI command is executed.

Caution You could damage the VSA, if you remove the VSA without entering the CLI command.

Before removing the VSA, we recommend that you shut down the interface so that there is no traffic running through the VSA when it is removed. Removing an VSA while traffic is flowing through the ports can cause system disruption.

For more information on OIR, go to “Enabling/Disabling the VSA” section on page 1-6.

Safety Guidelines

This section provides safety guidelines that you should follow when working with any equipment that connects to electrical power or telephone wiring. This section includes the following topics:

Safety Warnings, page 2-3

Electrical Equipment Guidelines, page 2-4

Preventing Electrostatic Discharge Damage, page 2-4

Safety Warnings

Safety warnings appear throughout this publication in procedures that, if performed incorrectly, might harm you. A warning symbol precedes each warning statement.

Warning Ultimate disposal of this product should be handled according to all national laws and regulations.

Hazardous voltage or energy is present on the backplane when the system is operating. Use caution when servicing.

Blank faceplates and cover panels serve three important functions: they prevent exposure to

C7200 VSA (VPN Services Adapter) Installation and Configuration Guide

 

OL-9129-02

2-3

 

 

 

Image 27
Contents Text Part Number OL-9129-02 Corporate HeadquartersPage N T E N T S Preventing Electrostatic Discharge Damage 2 Creating Dynamic Crypto Maps 4 OL-9129-02 Audience PrefaceObjectives OrganizationChapter Title Description Related Documentation Obtaining DocumentationCisco.com Documentation Feedback Cisco Product Security OverviewProduct Documentation DVD Ordering Documentation Product Alerts and Field Notices Reporting Security Problems in Cisco ProductsCisco Technical Support & Documentation Website Obtaining Technical AssistanceSubmitting a Service Request Definitions of Service Request SeverityObtaining Additional Publications and Information Xiv Data Encryption Overview OverviewVSA Overview VSA Module Front View Screws Handle Status LED lightHardware Required FeaturesThis section describes the VSA features, as listed in Table Feature Description/BenefitMIBs Supported Standards, MIBs, and RFCsPerformance StandardsEnabling/Disabling Scheme Command PurposeEnabling/Disabling the VSA Disabling the VSA during OperationCondition System is Configured Command Description of VSA BehaviorLEDs Cisco 7204VXR Router ConnectorsSee -2for the VSA connectors Slot LocationsCisco 7204VXR Router Front View Port adapter VSA in I/O controller slot Port adapter leverCisco 7206VXR Front View Cisco 7206VXR RouterHardware and Software Requirements Required Tools and EquipmentPlatform Software RequirementsHardware Requirements RestrictionsSafety Guidelines Safety WarningsOnline Insertion and Removal OIR Preventing Electrostatic Discharge Damage Electrical Equipment GuidelinesPreparing for Installation OL-9129-02 VSA circuit board is sensitive to ESD damage Handling the VSAThis section describes how to remove and install the VSA VSA Removal and InstallationRemoving and Installing the VSA VSA Removal and Installation OL-9129-02 Overview Configuration TasksConfiguring an IKE Policy Using the Exec Command InterpreterSignatures as the authentication method Key Management Protocol Isakmp policy configurationConfig-isakmp mode Optional Specifies the authentication method within an IKEDisabling VSA Optional Configuring a Transform SetDefining a Transform Set Transform type Description Crypto Transform Configuration Mode IPSec Protocols AH and ESPSelecting Appropriate Transforms Changing Existing Transforms Configuring IPSecEnsuring That Access Lists Are Compatible with IPSec Setting Global Lifetimes for IPSec Security AssociationsStep Command Purpose Creating Crypto Map Entries Creating Crypto Access ListsExits crypto-map configuration mode and return to Only one transform set can be specified when IKE isAuthenticator keys if the transform set includes an ESP authenticator algorithmCreating Dynamic Crypto Maps For this crypto access list Optional Accesses list number or name of anExtended access list. This access list determines If this is configured, the data flow identity proposedApplying Crypto Map Sets to Interfaces Monitoring and Maintaining IPSecRouter# show crypto isakmp policy Verifying IKE and IPSec ConfigurationsVerifying the Configuration Currentpeer 172.21.114.67 PERMIT, flags=originisacl This section provides the following configuration examples Configuration ExamplesConfiguring IKE Policies Example Configuring IPSec Configuration ExampleBasic IPSec Configuration Illustration Router a ConfigurationCrypto map is applied to an interface Router B Configuration Transform set defines how the traffic will be protectedSpecify the parameters to be used during an IKE negotiation Router# show diag Troubleshooting TipsTunnel I/F Monitoring and Maintaining the VSA Using Deny Policies in Access ListsConfiguration Guidelines and Restrictions Monitor and Maintenance CommandsD E Sa command, clear crypto Entries, creating Set pfs commandSet session-key command Set transform-set command Handling VPN Acceleration Module see VAM 1 Features Handling Monitoring and maintaining 4 OverviewIN-4