Extron electronic 300C, 600 Preparing the Table with a Router, Cutting the Opening with a Router

Page 11

Preparing the Table with a Router

Prepare the table with a router as follows:

ATTENTION: Potential damage to property. The routing templates for the various Cable Cubby models are not interchangeable. If you use the wrong template, you will cut an improperly sized hole. If you use a larger template than required, the cut will result in gaps in the table surface on either side of the enclosure.

ATTENTION: Potential damage to property. Ensure that only the wooden strips on the routing template contact the furniture. Failure to do so may scratch the furniture.

NOTE: The metal routing template is reusable. Do not discard the template when the installation is complete. Save it for installing other Cable Cubby models of the same size.

1.Mark the desired mounting location on the tabletop or other installation surface.

2.Place the mounting template assembly on the table, centered on the mounting location. Angle the template for the optimum positioning. If necessary, use a square to ensure that the template is properly positioned. Extron is not responsible for an improperly positioned Cable Cubby.

3.Once the template assembly is positioned properly, secure the assembly to the table with C-clamps.

CAUTION: Risk of injury to the eyes. Wear safety glasses when operating the router. Failure to comply can result in eye injury.

4.Using a router with a 5/8 inch (or 16 mm) outside diameter guide bushing and a

1/2 inch (or 12 mm or 12.7 mm) diameter straight router bit, carefully cut the opening in the surface (see figure 5).

Router

 

0

CABLEHSA

20

 

CUBBY

300

 

 

 

0

 

 

 

USERHSA

20

 

 

 

A

 

 

 

CCESS

USERCABLE

 

 

 

 

C

 

 

 

A

 

 

 

 

UBBY

300

 

 

CCESS

Figure 5. Cutting the Opening with a Router

5.Remove the C-clamps and the routing template.

Cable Cubby 300/600/800 • Installation

6

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Cable Cubby 300C Cable Cubby 300S Sicherheitsanweisungen Deutsch Safety InstructionsConventions Used in this Guide Following notifications are used Specifications AvailabilityPage Contents About the Cable Cubby 300, 600, IntroductionCable Cubby 300S US/domestic Enclosure Enclosure Minimum Table Thickness Maximum Table Thickness FeaturesPreparing the Routing Template InstallationInstallation Overview Preparing the CC 300 Mounting Template Preparing the TableCutting the Opening with a Router Preparing the Table with a RouterAAP Shelf Brackets Installing the Cables and AAPsPreparing the Table with a Hole Saw Cable Cubby 300C Only Installing the Power Module Installing the Power ModuleCable Pass-through AAPs Installing the CablesMounting the Cable Cubby Installing the AAPsInstalling the Shelf Assembly Cable Cubby 300C, Installation View Removing and Replacing the Cable Cubby Maintenance ModificationsRemoving the Cubby and its Shelves Replacing Cables or an AAP Adding an Additional Power Module CC 600 and CCCable Cubby 600 with Power Modules Cable Cubby 600 with Second Power Module Extron Cable Cubby Cable Cubby Part Numbers Reference InformationModel AAP Shelf Brackets Pass-through AAPs Pos Included PartsCC 300S and 300C Metal Routing Template Top Plate DimensionsCable Cubby 300C Extron Warranty
Related manuals
Manual 12 pages 39.18 Kb

300C, 300S, 800, 600 specifications

Extron Electronics is a well-respected name in the audiovisual industry, providing a range of sophisticated solutions to meet the needs of various installations. Among its notable offerings is the Extron 600 series, a line of products designed to elevate the performance and functionality of AV systems.

The Extron 600 series includes various devices primarily focused on video processing and scaling. One of the standout features of this series is its ability to handle multiple video formats. It supports high-definition resolutions, ensuring compatibility with a wide range of source devices and displays. This flexibility allows users to connect various equipment without worrying about format discrepancies.

Another prominent characteristic of the Extron 600 is its advanced scaling technology. The products in this series feature powerful DEEP COLOR support and exceptional image quality, providing sharp, vibrant outputs that enhance the overall viewing experience. The intelligent scaling algorithms automatically adjust content, maintaining visual integrity across different resolutions, which is crucial for professional presentations and high-stakes environments.

Connectivity options are abundant in the Extron 600 series. The devices often include HDMI, DisplayPort, and analog inputs, enabling seamless integration with diverse AV setups and ensuring that users can connect their preferred devices without hassle. Additionally, many units are equipped with built-in audio features, allowing for streamlined AV distribution while reducing the need for extra hardware.

The Extron 600 also boasts user-friendly controls. With intuitive interfaces and programmable presets, setup and operation are simplified, making it easy for users to manage their AV environments effectively. Remote management capabilities are often included as well, allowing for easy monitoring and adjustments through a centralized system.

Durability is a key characteristic of the Extron 600 series, built with high-quality components that withstand the rigors of continual use in commercial environments. Extron backs its products with robust support and warranty options, assuring users of reliable performance.

Overall, the Extron 600 series exemplifies cutting-edge technology, exceptional versatility, and user-centric design, making it an excellent choice for any professional AV application. With its combination of advanced features and reliable operation, it stands out as a significant contribution to modern audiovisual systems.
Top Page Image Contents