Extron electronic 300C, 600, 800, 300S manual Mounting the Cable Cubby, Installing the AAPs

Page 15

Installing the AAPs

The split AAPs can be replaced with passive Extron AAPs.

Replace a set of split AAPs as follows:

1.Remove the set of split AAPs to be replaced by unscrewing the nuts on the underside of the shelf bracket that fasten the plates to the bracket (see figure 7, on page 7).

2.Cable the AAP(s) before attaching the AAPs to the enclosure.

3.Insert the screws of the AAPs through the holes in the shelf or shelf bracket. Secure the AAPs to the shelf brackets with the provided captive washers and #4-40 nuts.

Installing the Shelf Assembly

From the underside of the Cable Cubby, gently push the AAP shelf assembly into the desired position at the desired elevation. Ensure there is enough space above the AAP assembly for the Cable Cubby lid to close completely. Secure the AAP shelf assembly into position with four Phillips head screws.

NOTE: If the AAP shelf assembly does not slide easily into the cubby, loosen the AAP mounting nuts. Retighten the AAP mounting nuts once the AAP shelf assembly is installed in position.

Mounting the Cable Cubby

CAUTION: Risk of personal injury. The flanged edges of the top of the surface enclosure are sharp. Exercise caution when the cubby is not installed in a table to prevent personal injury.

ATTENTION: Potential damage to property. The flanged edges of the top of the cubby are bevelled to an ultra-fine thickness of less than 0.04 inch (4/100 inch; approximately 1 mm). These edges are soft and can be easily nicked or bent. Exercise caution when handling and mounting the enclosure. Mishandling can damage the appearance of the enclosure.

1. If screw clamps are installed, remove them from both sides of the enclosure (see figure 10 on the next page).

NOTE: Figure 10 shows the installation of a Cable Cubby 300C.

Cable Cubby 300S, 600, and 800 installations are similar.

2.Remove the plastic strips that protect the corners of the enclosure and the plastic film on the finished surfaces. If a sticky residue remains, remove it with an appropriate metal cleaning product.

ATTENTION: Potential damage to property. Do not use isopropyl alcohol or other solvents to clean the Cable Cubby. Strong solvents will ruin some finishes.

3.Carefully lower the Cable Cubby into the hole to test the fit. If necessary, remove the enclosure and use a file or rasp to enlarge or smooth the edges of the opening (see figure 10 on the next page).

Cable Cubby 300/600/800 • Installation 10

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Cable Cubby 300C Cable Cubby 300S Sicherheitsanweisungen Deutsch Safety InstructionsConventions Used in this Guide Following notifications are used Specifications AvailabilityPage Contents About the Cable Cubby 300, 600, IntroductionCable Cubby 300S US/domestic Enclosure Enclosure Minimum Table Thickness Maximum Table Thickness FeaturesInstallation Installation OverviewPreparing the Routing Template Preparing the CC 300 Mounting Template Preparing the TableCutting the Opening with a Router Preparing the Table with a RouterInstalling the Cables and AAPs Preparing the Table with a Hole Saw Cable Cubby 300C OnlyAAP Shelf Brackets Installing the Power Module Installing the Power ModuleCable Pass-through AAPs Installing the CablesInstalling the AAPs Installing the Shelf AssemblyMounting the Cable Cubby Cable Cubby 300C, Installation View Removing and Replacing the Cable Cubby Maintenance ModificationsRemoving the Cubby and its Shelves Replacing Cables or an AAP Adding an Additional Power Module CC 600 and CCCable Cubby 600 with Power Modules Cable Cubby 600 with Second Power Module Extron Cable Cubby Cable Cubby Part Numbers Reference InformationModel AAP Shelf Brackets Pass-through AAPs Pos Included PartsCC 300S and 300C Metal Routing Template Top Plate DimensionsCable Cubby 300C Extron Warranty
Related manuals
Manual 12 pages 39.18 Kb

300C, 300S, 800, 600 specifications

Extron Electronics is a well-respected name in the audiovisual industry, providing a range of sophisticated solutions to meet the needs of various installations. Among its notable offerings is the Extron 600 series, a line of products designed to elevate the performance and functionality of AV systems.

The Extron 600 series includes various devices primarily focused on video processing and scaling. One of the standout features of this series is its ability to handle multiple video formats. It supports high-definition resolutions, ensuring compatibility with a wide range of source devices and displays. This flexibility allows users to connect various equipment without worrying about format discrepancies.

Another prominent characteristic of the Extron 600 is its advanced scaling technology. The products in this series feature powerful DEEP COLOR support and exceptional image quality, providing sharp, vibrant outputs that enhance the overall viewing experience. The intelligent scaling algorithms automatically adjust content, maintaining visual integrity across different resolutions, which is crucial for professional presentations and high-stakes environments.

Connectivity options are abundant in the Extron 600 series. The devices often include HDMI, DisplayPort, and analog inputs, enabling seamless integration with diverse AV setups and ensuring that users can connect their preferred devices without hassle. Additionally, many units are equipped with built-in audio features, allowing for streamlined AV distribution while reducing the need for extra hardware.

The Extron 600 also boasts user-friendly controls. With intuitive interfaces and programmable presets, setup and operation are simplified, making it easy for users to manage their AV environments effectively. Remote management capabilities are often included as well, allowing for easy monitoring and adjustments through a centralized system.

Durability is a key characteristic of the Extron 600 series, built with high-quality components that withstand the rigors of continual use in commercial environments. Extron backs its products with robust support and warranty options, assuring users of reliable performance.

Overall, the Extron 600 series exemplifies cutting-edge technology, exceptional versatility, and user-centric design, making it an excellent choice for any professional AV application. With its combination of advanced features and reliable operation, it stands out as a significant contribution to modern audiovisual systems.
Top Page Image Contents