Chapter 3 Installing the Client Adapter
Inserting a Client Adapter
Figure 3-6 Mounting the Antenna
95595
Step 6 The antenna rotates 90 degrees from its base. For optimal reception, position the antenna so it is pointing straight up (see Figure
Figure 3-7 Rotating the Antenna
95596
Step 7 Boot up your PC. The green LED lights when the card is inserted properly.
Step 8 If the Found New Hardware Wizard window appears, click Cancel.
Step 9 Go to the “Installing the Client Adapter Software” section below.
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
| ||
|