TROUBLESHOOTING
Problem |
| Possible Solution |
No Operation | 1. | Verify the 12V power supply is connected to the selector. |
| 2. | Make sure all devices are powered on. |
No picture or signal; | 1. Make sure your video display is properly set in PC mode. | |
Poor picture. | 2. | Check the resolution on your PC. You may need to lower |
| ||
|
| it to a resolution that is compatible with your monitor. |
| 3. | Adjust the Equalization switch that is located on the |
|
| remote unit. |
| 4. | Turn all equipment power to off and then restore power. |
|
|
|
11