Fujitsu Siemens Computers Siemens S7 300 manual 207

Series HMI Connection Manual

2. PLC Ethernet Setting

Simatic (V5.4)：

1.Right click on “CP343-1 Lean” module and select "Object Properties", on this page set up “IP address” and “Subnet mask” for CP343-1 Lean Module. Please be aware that the “IP address” setting must be the same as PLC Ethernet setting in Screen Editor and the “Subnet mask” setting must be the same as the HMI Ethernet setting in Screen Editor.

2.To add a new "Other station", right click on “Object Properties", add a new Interface and set the “Type” as “Industrial Ethernet”. To set up HMI “IP address” and “Subnet mask”, go to “Ethernet interface" > "Properties", please be aware that this setting must be the same as the HMI Ethernet setting in Screen Editor. As the setting is completed, left click on the green box above “Other station” and drag to link with the green line above.

V1.02 Revision January, 2012 207