BenQ G2420HDB Connect the PC video cable, Either, Connect the power cable to the monitor

Page 8

2. Connect the PC video cable.

Either

Do not use both DVI-D cable and D-Sub cable on the same PC. The only case in which both cables can be used is if they are connected to two different PCs with appropriate video systems.

Connect one end of the DVI-D cable to the monitor DVI-D jack and the other end to the DVI-D port on your computer. (optional)

		The DVI-D format is used for direct digital connection	Or
		The DVI-D format is used for direct digital connection	Or
		between source video and digital LCD monitors or
		projectors. The digital video signals produce a superior
		quality picture than analog video signals.
		Connect the plug of the D-Sub cable (at the end without
		the ferrite filter) to the monitor D-Sub jack. Connect the
		other plug of the D-Sub cable (at the end with the ferrite
		filter) to the computer video D-Sub jack.
		Tighten all finger screws to prevent the plugs from acci-
		dently falling out during use.
3. Connect the power cable to the monitor.
		Plug one end of the power cord into the jack labelled
		‘POWER IN’ on the rear of the monitor. Do not connect
		the other end to a power outlet just yet.

8 How to assemble your monitor hardware

Image 8

Contents Welcome Copyright AC plug isolates this equipment from the AC supplyTable of Contents Getting started CD-ROMSignal Cable DVI-D optional Front view Back view AC power input jack DVI-D input jack Sub input jackGetting to know your monitor How to assemble your monitor hardware Attach the monitor baseEither Connect the power cable to the monitorConnect the PC video cable Connect-to and turn-on the power Route the cables via the cable clipHow to detach the stand base Prepare the monitor and areaGetting the most from your BenQ monitor How to install the monitor on a new computer How to upgrade the monitor on an existing computer SeeHow to install on Windows Vista systems Open Display SettingsClick the Advanced Settings button Click Continue in the prompted User Account Control windowHow to install on Windows XP system Open Display PropertiesPicture optimization How to adjust your monitor Control panelHot key mode Mode hot keyBrightness and Contrast hot keys To exit, press the Menu keyMain menu mode Display Picture Picture Advanced SystemDisplay menu To return to the previous menu, press the Menu keyInput signal Adjust the value See also Picture Picture menu Green Normal Allows video and stillRed DSCs, etc Picture ModePicture Advanced menu Movie Picture Mode Picture Mode. The screenDynamics, or OSD Settings Press Enter to enter the OSD Settings menu System menuInput Use this to change Language Sets the OSD menu languagePosition Adjusts the horizontal Position Adjusts the verticalDisplay Time Adjusts the display time DisabledTroubleshooting Frequently asked questions FAQNeed more help? For details