Cisco Systems 2500 Series manual Installing AC and DC Power Supplies

Installing AC and DC Power Supplies

Figure 4 Removing the Power Supply

AC power supply Fan

H9082

Step 4 Place the removed screw and power supply in an antistatic bag.

Installing AC and DC Power Supplies

This section describes how to install AC and DC power supplies. Although an AC power supply is shown in the illustrations that follow, the procedure is the same for installing both AC and DC power supplies.

Step 1 Put the power supply into place and gently slide it toward the back of the chassis engaging the tabs on the bottom of the case with the slots in the bottom of the power supply. (See Figure 5.)

Figure 5 Inserting the Power Supply

Token Ring Switch

0	1	2	3	4		5	6	7	8	9
					Stations

Token Ring Switch

0	1	2	3	4		5	6	7	8	9
					Stations

			Token Ring Switch							Patch				Token Ring Switch
										cables
0	1	2	3	4	5	6	7	8	9		0	1	2	3	4	5	6	7	8	9

	Lobe
	cables	H9632
Stations	Stations

Step 2 Install the screw that came with the Cisco power supply into the screw hole between the power switch and power connector. (See Figure 6.)

Installing Cisco AC and DC Power Supplies in Cisco 2500 Series Routers 5