Cisco Systems 2500 Series manual Caution Do not pull on the connector wires

Removing AC and DC Power Supplies

Figure 2 Removing the Screw

Input: 100-240VAC

Freq: 50/60 Hz

Current: 1.2-0.6A

Watts: 40W

1

0

H9079

Screw

Step 2 Disconnect the power connector from the system board. (See Figure 3.) Grasp the sides of the power connector and pull upward while rocking the connector side to side.

Caution Do not pull on the connector wires.

Figure 3 Disconnecting the Power Connector

AC power supply

Fan

H9081

Power connector

Fan connector

Step 3 Push the loosened power supply backward and lift it out of the chassis. (See Figure 4.)

4Installing Cisco AC and DC Power Supplies in Cisco 2500 Series Routers