Harbor Freight Tools 35740 Specifications, Save this Manual, Safety Warning & Cautions

READ ALL INSTRUCTIONS BEFORE ASSEMBLING OR OPERATING THIS TOOL.

	SPECIFICATIONS
Characteristic		Value
Tank Dimensions		17-3/8" x 14-1/4" x 8-3/4"
Max. Solvent Capacity		3-1/2 Gallons
Pump Output		50 GPH
Electrical Requirements		.7 Amps @ 110V, 60Hz
Weight		15-1/2 lbs.

SAVE THIS MANUAL

You will need the manual for the safety warnings and cautions, assembly instructions, operating procedures, maintenance procedures, trouble shooting, parts list, and diagram. Keep your invoice with this manual. Write the

invoice number on the inside of the front cover. Keep both this manual and your invoice in a safe, dry place for future reference.

SAFETY WARNING & CAUTIONS

WARNING: When using electric tools, machines, or equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. READ ALL INSTRUCTIONS BEFORE USING THIS TOOL!

1.KEEP WORK AREA CLEAN. Cluttered areas invite injuries.

2.KEEP CHILDREN AWAY. All children should be kept away from the work area. Don’t let them handle tool.

3.DO NOT OPERATE THE PARTS WASHER IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not attempt to operate.

4.READ ALL INFORMATION CONCERNING THE SOLVENT YOU ARE USING. Do not use solvents with a flashpoint of less than 150°. Biodegradable solvents are recommended as the use of mineral solvents or petroleum based solvents will cause premature pump wear. Chlorinated solvents, e.g. 1-1-1 Trichloroethane and Methylene Chloride (also known as methyl chloride) can chemically react with aluminum and may explode so are strictly prohibited as this tool contain aluminum. If you are in any doubt whatsoever, contact the solvent manufacturer.

5.DO NOT USE OR STORE NEAR OPEN FLAMES, PILOT LIGHTS IN STOVES OR HEATERS, OR ANY OTHER HEAT SOURCE. Solvents are highly flammable. Always make sure there is adequate ventilation. Extinguish all cigarettes when cleaning. Industrial applications must follow OSHA requirements.

6.DO NOT OVERFILL THE PARTS WASHER. Do not fill above the level of the parts tray or serious injury may occur.

7.MATERIALS USED WHEN CLEANING MAY BE HARMFUL OR FATAL IF INHALED AND/OR SWALLOWED. Once again, when using the tool, always make sure there is adequate ventilation. Always use a mask or respirator when close to fumes.

REV 05/05;06/05

SKU 35740 For technical questions, please call 1-800-444-3353. Page 2