Remaining Assembly
Step 1: Attach the FILTER (#7) to the PUMP (#6), as shown in Figure 4.
Step 2: Attach the SPIGOT (#9) to the PUMP, as shown in Figure 4.
Step 3: Set the PARTS TRAY (#3) in the TANK (#1).
Flexible
Spigot
(#9)
Parts Tray | Pump Unit |
(#3) | (#6) |
Filter
(#7)
Figure 4 — Attaching the Remaining Parts
OPERATIONS
Step 1: Parts can soaked in the TANK (#1), but should not be left overnight.
Step 2: Use the PARTS SHELF (#2) when using the FLEXIBLE SPIGOT (#9) and whenever cleaning small parts.
Step 3: Do not run the PUMP (#6) when small parts are in the TANK.
Step 4: Do not run the PUMP without the FILTER (#7) attached.
Step 5: Never leave PUMP running unattended.
Step 6: Do not wash plastic parts when using petroleum based solvents.
SKU 35740 | For technical questions, please call | Page 9 |
