Power Mac G4 / Macintosh Server G4
Video Card
Replacement Instructions
Follow the instructions in this sheet carefully. Failure to follow these instructions could damage your equipment and void its warranty.
Note: Written and video instructions covering
Warning: During this procedure, keep small parts away from children.
Tools Required
•Phillips screwdriver
•Pliers
Opening the Computer
Warning: Always turn off your computer before opening it to avoid damaging its internal components.
1.Place your computer on a clean, flat surface.
2.If you think your computer is in sleep, press the power button on the front of the computer to wake it.
3.Shut down your computer by opening the Special menu and choosing Shut Down. Then wait five minutes for the computer’s internal components to cool down.
4.If you attached a security cable through the computer’s lockable cover latch, remove the cable.
5.Unplug all other cables from the computer except the power cord.