There are four buttons and an LCD on the panel of DigiCopier VII.
1 – LCD shows a function or a message.
2 – it is used to scroll up function menus.
3 – it is used to scroll down function menus.
4 – it is used to execute a function.
5 – it is used to cancel a function.
II.Connecting the power cable and turning on the DigiCopier VII
a.Connect the power cord provided from the wall outlet to the back of the DigiCopier VII.
b.A main power switch is located at the back of the tower. Turn the switch on. Another auxiliary power switch is located on the front of the tower.
III. Steps for the Copying Process
Note: may not able to
Step 1 Turn on the DigiCopier VII by pressing the auxiliary power switch.
Step 2 Insert media you wish to duplicate into the source tray on the top.
www.addonics.com
Technical Support | Phone: | Email: www.addonics.com/support/query/ |