Addonics Technologies DCHDSAEU manual Cable Connections When Used as an Internal Hard Drive, Data

Page 4

Cable Connections When Used as an Internal Hard Drive

Power: Use either the 4-pin Molex or the 15-pin SATA power connector. Do not use both power sources simultaneously.

Data:

Connect the SATA cable to the SATA connector located at the back of the drive cradle and the other end to the SATA connector on your SATA host controller or onboard SATA port.

LED cable: Only needed if you want to get drive access signal from the SATA controller. Use the LED cable to connect the LED pin located at the back of the cradle (beside the LED switch) to the LED jumper pins on your SATA host controller or onboard SATA port to enable the drive activity LED.

Factory default, LED signal coming from hard drive.

Powering On Drive Cradle: To power on the drive cradle, slide in the Diamond cartridge and using the key (supplied), turn the cradle lock located at the front of the cradle to the LOCK position. This will provide power as indicated by the green LED lighting up and secure the cartridge.

LED DISPLAY Switch

LEFT – LED signal from drive

RIGHT – LED signal from controller

Power & Drive

 

 

 

 

 

 

Activity LED

 

SATA power

SATA data

 

 

connector

 

 

 

 

connector

 

 

 

Key Lock Switch

Technical Support

If you need assistance to get your unit functioning properly, please call Addonics Technical Support. Our technical staff will be happy to assist you, but they will need your help to do so. Calling the technical support staff without all the proper information can be both time consuming and frustrating. Here are some tips to help you out:

MODEL NUMBER – Please have this number on hand. SYSTEM INFORMATION – Type of computer, peripherals, etc. OPERATING SYSTEM – What version of Windows WHAT’S THE TROUBLE? – Give enough information

about your problem so that we can recreate and diagnose it.

FREE Software Drivers for all Addonics Technologies

Products are available 24 hours per day at the

World Wide Web Site: www.addonics.com.

Contact Information

Phone:408-433-3899

Fax:408-433-3898

Email:http://www.addonics.com/sales/query/

Internet: http://www.addonics.com

TECHNICAL SUPPORT

Phone:

408-433-3855

Hours:

8:30 am - 6:00 pm PST

Email:

http://www.addonics.com/support/query/

Image 4
Contents Addonics FCC Warning Statement Hardware Installation GuideStep For Sata Drive Cable Connections For IDE DriveCable Connections When Used as an Internal Hard Drive Factory default, LED signal coming from hard driveData Technical Support