Addonics Technologies HDUSI325AES Adv Setup, Detect HDD Delay, Read Error Skip, Update Firmware

Adv Setup

Adv Setup o￿ers expert users access to more advanced system settings.

To access this option, hold down the ESC key for two seconds until it appears. 10. Adv Setup

Detect HDD Delay

This function is used to set the time interval between the system's re-scans of all connected HDD devices.

Press ENT and the LCD will show the following info.

10-01. Adv Setup

Detect HDD Delay

Press ENT then use the Up and Down buttons to choose di￿erent time settings (1~60 sec)

Detect HDD Delay 1Sec

Read Error Skip

This function sets the system to ignore any errors during the copying process. Normally if there is an error during copying a warning is displayed on the LCD. By using this function, users can also copy a HDD with errors.

10-02. Adv Setup

Read Error Skip

Press ENT to enter the following screen. By default this option is set to OFF. Use the up and down buttons to enable or disable this option.

Read Error Skip

O￿

Update Firmware

This function is used to update the system's ￿rmware. Download the latest version of the ￿rmware from the Internet at www.addonics.com. For the complete instructions, visit the ￿rmware update

webpage or view the instructions found later in this manual.

This function is used to compare the current system ￿rmware version with the new version the user is upgrading to. This ensures that the downloaded ￿ rmware is the latest version. The message "Last update F/W" indicates that it is the latest version.